Eric1868
-
Posts
3 -
Joined
-
Last visited
Posts posted by Eric1868
-
-
So spent some time doing testing...
Can't seem to figure out how quickly it checks/refreshes from the .SyncIgnore file but restarting the app may have helped.
This is what I was able to find:
abc # Ignores ALL dirs
/abc # Ignores ONLY root
/*/abc # Ignores ALL EXCEPT root
/*/*/abc # Ignores ALL AFTER 2 dir levels
/*/*/*/abc # Ignores ALL AFTER 3 dir levels
/**/abc # Ignores ALL EXCEPT root
*/abc # Ignores ALL EXCEPT root
**/abc # Ignores ALL EXCEPT root
.* # Ignores ALL HIDDEN files & dirs
abc.ext # Ignores ALL files of type .ext
abc.* # Ignores ALL files named of ANY type
abc* # Ignores ALL files & dirs begining with "abc"
# FiLeS seem to be CaSe sensitive
*xyz/abc.ext # Ignores ALL "abc.ext" files in ANY "xyz" dir
*xyz/*abc*.* # Ignores ALL files containing "abc" in any "xyz" dir
*xyz/*abc* # Ignores ALL files & dirs containing "abc" in any "xyz" dir -
Great news...
Works on Synology DS-411+
http://www.synology.com/us/products/DS411+/
> Create destination/sync folder...
> SSH into your NAS ( http://forum.synology.com/wiki/index.php/Enabling_the_Command_Line_Interface )
> run in local terminal:
$ ssh root@192.you.nas.ip
(log in)
$ cd ~
$ wget http://btsync.s3-website-us-east-1.amazonaws.com/btsync_glibc23_i386.tar.gz
$ tar -xzvf btsync*
$ ~/btsync
> go to http://192.you.nas.ip:8888/
> make sure you open firewall via Synology, but do not recommend opening up port to WAN on router firewall
> [Add Folder] ...
> Generate or copy the "secret"
> Select "path" folder /volume1/BTsync/syncedFolder
> [Add]
Presto!
-E
Can anyone make recommendations to make sure this runs on startup when/if the NAS gets restarted? Thanks!
Supported NAS
in Sync for NAS (Network Attached Storage)
Posted
Synology DS-411+
http://www.synology....roducts/DS411 /
Updated for autostart on reboot....
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> enable ssh ~ > NAS web gui > control panel > terminal > Enable SSH
> SSH into NAS as root ($ ssh root@192.168.1.100)
$ cd ~
$ wget http://btsync.s3-web...c23_i386.tar.gz
$ tar -xzvf btsync*
$ mv ~/btsync /usr/syno/etc/rc.d/btsync.sh
$ reboot
> wait about 5 mins, takes a while for everything to restart
> confirm port :8888 is open on NAS firewall (not router / WAN)
> http://192.168.1.100:8888/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~