Jx7
Members-
Posts
30 -
Joined
-
Last visited
Everything posted by Jx7
-
active upload on a machine but nothing downloading in the other
Jx7 replied to Jx7's topic in Sync General Discussion
Thank you for all these answers........... -
active upload on a machine but nothing downloading in the other
Jx7 replied to Jx7's topic in Sync General Discussion
I had an empty folder on my NAS and when I deleted it it works again. On the other machine there is a folder with the same name but not empty. So btsync did not check the content of this folder?? -
Hi, I see a strange thing on my btsync in my NAS: nothing is downloaded but on the other machine I see an upload which is the speed connection I have in my home. This is strange, I don't see any files on the synced folder on my NAS and no active downloads on the btsync GUI on my NAS. I think it can be the port? The listenning port is 7028 in my NAS and 7029 in the other machine. Is there another port to open? Both have version 1.1.70.
-
"listening_port" but I think I confused both because I always used the "listening_port" to access the WebUI while I should use the "listen" value isn't it? But the strange thing is that I can access the WebUI using both...
-
Since the 1.1.70 update, impossible to start btsync with a custom port in btsync.conf. I downgrade to 1.1.69 and it work.
-
In that case, if putting back a folder to his original path make it to be deleted because of the read-only mode, the same thing have to be done for the deleted folder. For example with the same configuration which is: Device A and Device B are synchronized and Device B use a read-only secret. A folder in Device A is synced on Device B. Now I delete this folder from Device B. With the same reasoning, the folder have to be synced again in order for Device A to keep Device B in sync. But this is not the case ; I do it with every day and this is why I was surprised with this situation.
-
I don't understand why this is a normal behaviour because the file his moved on the receiving machine, not on the sending machine. I should be able to put whatever I want on the reading machine because BTSync never send it with the read-only mode.
-
I just tried with a third Linux (Linux_C) and this one is different: when I move back the folder into his original path it stay at this place. Strange... The only difference is the presence of sub-folders on Linux_A & Linux_B between the path I put on BTSync and the final folder.
-
Thanks for your answers guys. I use the 1.1.15 version and yes, the Linux_B use a read-only secret so it's normal?
-
Hi, I have a question about the folders in the SyncTrash folder. I create a folder Dump on my Linux_A (/Linux_A/Dump) The folder Dump is automatically transferred by BTSync on my Linux_B (/Linux_B/Dump) I delete the folder Dump on my Linux_A The folder Dump is automatically moved into the SyncTrash folder on my Linux_B (/Linux_B/.SyncTrash/Dump) I move the folder Dump on my Linux_B into his original path (/Linux_B/Dump) And now my problem is that BTSync automatically move again the folder Dump into the SyncTrash folder on my Linux_B (/Linux_B/.SyncTrash/Dump) I stop & start the 2 BTSync but still the same. Is it normal? If yes, how can I change that please? Thank you for your help
-
I tar all the folders with a lot of little files and it's OK. Thank you
-
Not only but yes, there is some folders with a lot of files between 200kB and 4MB. You think I should tar folders before sync them?
-
Hi, With the example of this post (BTSync port = 20001 and peer port = 20002), what is the firewall configuration if I want to use BTSync with known peers and direct connections only? 20001 to 20002 and 20002 to 20001 only? Thank you
-
Hi, Here's my setup: BTSync is installed on my Synology NAS 1812+ and on a Linux. Sync is done aver Internet. I use BTSync to get files from the Linux machine to my NAS so I use the read-only key. My Internet speed connection is about 600kB/s and I usually see this speed in BTSyncbut since yesterday I can only see 30~40kB/s ! This is very very slow... I tried to download by FTP the files that are syncing and it was a normal speed (~600kB/s). I tried to restart BTSyncon the two sides but still the same... I've just installed BTSync, while I love the idea I'm having a bit of a speed issue. I don't know what to do, any help is appreciated.
-
My question was about my problem described in the first message. My CPU problem was not with btsync and I was just wondering if it can be the source of my problem. Anyway, thank you for the very interesting FAQ
-
I found a problem a my Linux server which was using a lot of CPU. Do you think it can be a reason of this problem?
-
Thanks for these precisions. I use btsync on my NAS Synology 1812+ and on a Ubuntu 11.10 (1.0.134 on both)
-
Hi, I'm not sure I wrote correctly the title ^^ I would like to understand the functioning of btsync in some cases like: What happen if I stop and restart btsync while it is syncing a file? Example: btsync is syncing FILE_1 so I see a file nammed FILE_1.!sync When I restart btsync FILE_1.!sync is still present but I see a new file syncing : FILE_2.!sync I tried to restart many btsync times and every time I did it, I saw a new FILE_x.!sync So does btsync choose randomly what file is going to be synced? Does btsync support resume for the previous file? I mean when btsync will sync again FILE_1, it will be a full sync or btsync will start where it ended? Does btsync sync many files at the time? I hope I'm clear Thanks for your help.
-
You need to open a SSH or telnet connection to your NAS to do this Linux command. Be very careful if you don't know what you're doing.
-
Sometimes sync is just stopped and I need to restart BitTorrent sync
Jx7 replied to Jx7's topic in Sync General Discussion
It seems work much better since I installed the 1.0.134 -
Work much better since I updated to the 1.0.134 !