Hey guys, Been using btsync for a while and it's always been a bit sluggish for me. So I finally decided to do something about it and hopefully fix that. I'm running the latest version (1.2.82), on two machines that are: Locally - running Ubuntu 12.04.3 Remote - server running Gentoo My connection is an ADSL2+ connection (20Mbps down / 1Mbps up roughly) located in Melbourne, AU My remote machine is sitting in a data-centre with a 150Mbps port located in The Netherlands For reference, I can max out this connection downloading via HTTP but Btsync is much nicer in that it's automated. Unfortunately using Btsync means I only get ~200KB/s (500 on a good night) while using HTTP means I can get at least 1MB/s off the server. Here's the log: [20140204 01:35:39.824] total physical memory 536870912 max disk cache 2097152[20140204 01:35:39.824] Using IP address 10.1.1.12[20140204 01:35:39.824] Loading config file version 1.2.82[20140204 01:35:39.962] Loaded folder /mnt/raid/download/-snip-[20140204 01:35:39.986] Loaded folder /mnt/raid/download/-snip-[20140204 01:35:40.025] Loaded folder /mnt/raid/download/-snip-[20140204 01:35:40.146] Loaded folder /mnt/raid/download/-snip-[20140204 01:35:40.906] UPnP: Unable to get external IP.[20140204 01:35:40.935] UPnP: Device error "http://10.1.1.1:49152/description.xml": (-2) [20140204 01:36:17.856] UPnP: Device error "http://10.1.1.2:1990/WFADevice.xml": (-2) [20140204 01:36:17.864] UPnP: Device error "http://10.1.1.1:49152/description.xml": (-2) [20140204 01:36:17.889] UPnP: Unable to get external IP.[20140204 01:36:28.824] NAT-PMP: Unable to map port with NAT-PMP.-- lots of 'piece complete' notifications ---- more UPnP errors (same as above) ---- repeat ad infinitum --So the .1 address is the modem, the .2 address is the access point. I hope I've provided enough info. Any suggestions guys?