igboo

Members
  • Content Count

    8
  • Joined

  • Last visited

About igboo

  • Rank
    New User
  1. ldd tells me my glibc version is 2.3.6. c# ldd --versionldd (GNU libc) 2.3.6Copyright (C) 2005 Free Software Foundation, Inc.The linux versions compiled for 2.3 don't do me any good. I'm trying to run on an ARM cpu. What version glibc is required for the ARM binary?
  2. Still no core dump. I got this on the console: # ./btsync --nodaemontotal physical memory -1 max disk cache 2097152Using IP address 192.168.1.102test sha1: AE5B <cut>test sha2: 630D <cut>test aes: 0A94 <cut>./btsync: relocation error: ./btsync: symbol __res_iclose, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference
  3. There is no core dump created. Do I need to do anything to cause the core dump to happen? Cheers
  4. Hello RomanZ, I have debug enabled with the contents of debug.txt as FFFF. All I get in the log is the five lines I posted. I just tried running again. This is all I get. [20140217 11:20:30.815] total physical memory -1 max disk cache 2097152[20140217 11:20:30.819] Using IP address 192.168.1.102[20140217 11:20:30.821] test sha1: AE5BD <cut for securtiy>[20140217 11:20:30.821] test sha2: 630DC <cut for security>[20140217 11:20:30.821] test aes: 0A940 <cut for security>I lose the process immediately... If I run the command to start btsync and then run ps, it's already gone. For what it's worth, here is my system log since the last reboot. Feb 16 13:14:03 HS-DHTGLD3C syslogd 1.4.1: restart.Feb 16 13:14:03 HS-DHTGLD3C kernel: klogd 1.4.1, log source = /proc/kmsg started.Feb 16 13:14:03 HS-DHTGLD3C kernel: Cannot find map file.Feb 16 13:14:03 HS-DHTGLD3C kernel: No module symbols loaded - kernel modules not enabled. Feb 16 13:14:03 HS-DHTGLD3C kernel: cannot find any symbols, turning off symbol lookups Feb 16 13:14:03 HS-DHTGLD3C kernel: Linux version 2.6.16.16-arm1 (root@dh2-bs) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #3 Wed Mar 7 13:21:58 JST 2007Feb 16 13:14:03 HS-DHTGLD3C kernel: CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ)Feb 16 13:14:03 HS-DHTGLD3C kernel: Machine: MV-88fxx81Feb 16 13:14:03 HS-DHTGLD3C kernel: Using UBoot passing parameters structureFeb 16 13:14:03 HS-DHTGLD3C kernel: Sys Clk = 250000000, Tclk = 166664740Feb 16 13:14:03 HS-DHTGLD3C kernel: Feb 16 13:14:03 HS-DHTGLD3C kernel: Feb 16 13:14:03 HS-DHTGLD3C kernel: - Warning - This LSP release was tested only with U-Boot release 1.7.3 Feb 16 13:14:03 HS-DHTGLD3C kernel: Feb 16 13:14:03 HS-DHTGLD3C kernel: Memory policy: ECC disabled, Data cache writebackFeb 16 13:14:04 HS-DHTGLD3C logchkd[793]: logchkd ver.1.11(Feb 14 2007) startedFeb 16 13:14:04 HS-DHTGLD3C TeraStation: Started logchkdFeb 16 13:14:04 HS-DHTGLD3C kernel: CPU0: D VIVT write-back cacheFeb 16 13:14:04 HS-DHTGLD3C kernel: CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 setsFeb 16 13:14:04 HS-DHTGLD3C kernel: CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 setsFeb 16 13:14:04 HS-DHTGLD3C kernel: Built 1 zonelistsFeb 16 13:14:04 HS-DHTGLD3C kernel: Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 BOOTVER=1.10Feb 16 13:14:04 HS-DHTGLD3C kernel: PID hash table entries: 1024 (order: 10, 16384 bytes)Feb 16 13:14:04 HS-DHTGLD3C kernel: Console: colour dummy device 80x30Feb 16 13:14:04 HS-DHTGLD3C kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)Feb 16 13:14:04 HS-DHTGLD3C kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)Feb 16 13:14:04 HS-DHTGLD3C kernel: Memory: 128MB 0MB 0MB 0MB = 128MB totalFeb 16 13:14:04 HS-DHTGLD3C kernel: Memory: 110464KB available (3128K code, 573K data, 112K init)Feb 16 13:14:04 HS-DHTGLD3C kernel: Mount-cache hash table entries: 512Feb 16 13:14:04 HS-DHTGLD3C TeraStation: Started inetdFeb 16 13:14:04 HS-DHTGLD3C kernel: CPU: Testing write buffer coherency: okFeb 16 13:14:04 HS-DHTGLD3C kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrdFeb 16 13:14:04 HS-DHTGLD3C TeraStation: Started kernelmonFeb 16 13:14:04 HS-DHTGLD3C kernel: Freeing initrd memory: 15360KFeb 16 13:14:04 HS-DHTGLD3C kernel: NET: Registered protocol family 16Feb 16 13:14:04 HS-DHTGLD3C kernel: FLASH boardId = 14Feb 16 13:14:04 HS-DHTGLD3C kernel: Flash bankwidth 1, base ff800000, size 400000Feb 16 13:14:04 HS-DHTGLD3C kernel: BUFFALO TS_HTGL FLASH size 4096[KB]Feb 16 13:14:04 HS-DHTGLD3C kernel: Feb 16 13:14:04 HS-DHTGLD3C miconmon[808]: miconmon-1.03 started Feb 16 13:14:04 HS-DHTGLD3C kernel: Marvell Development Board (LSP Version 1.7.8_NAS)-- BUFFALO_BOARD_TS_HTGL_R5 Feb 16 13:14:04 HS-DHTGLD3C kernel: Feb 16 13:14:04 HS-DHTGLD3C kernel: Detected Tclk 166664740 and SysClk 250000000 Feb 16 13:14:04 HS-DHTGLD3C kernel: Marvell USB EHCI Host controller #0: c16f5e00Feb 16 13:14:04 HS-DHTGLD3C kernel: pexBarOverlapDetect: winNum 2 overlap current 0Feb 16 13:14:04 HS-DHTGLD3C kernel: mvPexInit:Warning :Bar 2 size is illigalFeb 16 13:14:04 HS-DHTGLD3C kernel: it will be disabledFeb 16 13:14:04 HS-DHTGLD3C kernel: please check Pex and CPU windows configurationFeb 16 13:14:04 HS-DHTGLD3C kernel: PCI: bus0: Fast back to back transfers enabledFeb 16 13:14:04 HS-DHTGLD3C kernel: PCI: bus1: Fast back to back transfers enabledFeb 16 13:14:04 HS-DHTGLD3C kernel: SCSI subsystem initializedFeb 16 13:14:04 HS-DHTGLD3C kernel: usbcore: registered new driver usbfsFeb 16 13:14:04 HS-DHTGLD3C kernel: usbcore: registered new driver hubFeb 16 13:14:04 HS-DHTGLD3C kernel: use IDMA acceleration in copy to/from user buffers. used channels 2 and 3 Feb 16 13:14:04 HS-DHTGLD3C kernel: Done. Feb 16 13:14:04 HS-DHTGLD3C kernel: Fast Floating Point Emulator V0.9 (c) Peter Teichmann.Feb 16 13:14:04 HS-DHTGLD3C kernel: SGI XFS with large block numbers, no debug enabledFeb 16 13:14:04 HS-DHTGLD3C kernel: Initializing Cryptographic APIFeb 16 13:14:04 HS-DHTGLD3C kernel: io scheduler noop registeredFeb 16 13:14:04 HS-DHTGLD3C kernel: io scheduler anticipatory registered (default)Feb 16 13:14:04 HS-DHTGLD3C kernel: io scheduler deadline registeredFeb 16 13:14:04 HS-DHTGLD3C kernel: io scheduler cfq registeredFeb 16 13:14:04 HS-DHTGLD3C kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabledFeb 16 13:14:04 HS-DHTGLD3C kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550AFeb 16 13:14:04 HS-DHTGLD3C kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550AFeb 16 13:14:04 HS-DHTGLD3C kernel: RAMDISK driver initialized: 3 RAM disks of 16384K size 1024 blocksizeFeb 16 13:14:04 HS-DHTGLD3C kernel: loop: loaded (max 8 devices)Feb 16 13:14:04 HS-DHTGLD3C kernel: Marvell Gigabit Ethernet Driver 'egiga':Feb 16 13:14:04 HS-DHTGLD3C kernel: o Ethernet descriptors in DRAMFeb 16 13:14:04 HS-DHTGLD3C kernel: o DRAM SW cache-coherencyFeb 16 13:14:04 HS-DHTGLD3C kernel: o Checksum offload enabledFeb 16 13:14:04 HS-DHTGLD3C kernel: o Loading network interface ** egiga_init_module (0)Feb 16 13:14:04 HS-DHTGLD3C kernel: 'eth0' Feb 16 13:14:04 HS-DHTGLD3C kernel: Core Driver (ERROR) 0 : Warning: Future revision ID 02 for Device 6042. Implementing latest workaroundsFeb 16 13:14:04 HS-DHTGLD3C kernelmon: cmd=lanact 0 halfFeb 16 13:14:04 HS-DHTGLD3C kernel: Core Driver (ERROR) 0 : disable pci conventional features when working in PCI-X. pciCommand original value:0x0107e371. new value: 0x0107e011.Feb 16 13:14:04 HS-DHTGLD3C kernel: scsi0 : Marvell SCSI to SATA adapterFeb 16 13:14:04 HS-DHTGLD3C kernel: scsi1 : Marvell SCSI to SATA adapterFeb 16 13:14:04 HS-DHTGLD3C kernel: scsi2 : Marvell SCSI to SATA adapterFeb 16 13:14:04 HS-DHTGLD3C kernel: scsi3 : Marvell SCSI to SATA adapterFeb 16 13:14:05 HS-DHTGLD3C kernel: ** BUFFALO Disable Command Queuing Function [0 0] **Feb 16 13:14:05 HS-DHTGLD3C kernel: ** BUFFALO Disable Command Queuing Function [0 1] **Feb 16 13:14:05 HS-DHTGLD3C kernel: ** BUFFALO Disable Command Queuing Function [0 2] **Feb 16 13:14:05 HS-DHTGLD3C kernel: ** BUFFALO Disable Command Queuing Function [0 3] **Feb 16 13:14:05 HS-DHTGLD3C kernel: Vendor: SAMSUNG Model: HD501LJ Rev: CR10Feb 16 13:14:05 HS-DHTGLD3C kernelmon: cmd=lanact 1000 fullFeb 16 13:14:05 HS-DHTGLD3C kernel: Type: Direct-Access ANSI SCSI revision: 03Feb 16 13:14:05 HS-DHTGLD3C kernel: Vendor: SAMSUNG Model: HD501LJ Rev: CR10Feb 16 13:14:05 HS-DHTGLD3C kernel: Type: Direct-Access ANSI SCSI revision: 03Feb 16 13:14:05 HS-DHTGLD3C kernel: Vendor: SAMSUNG Model: HD501LJ Rev: CR10Feb 16 13:14:05 HS-DHTGLD3C kernel: Type: Direct-Access ANSI SCSI revision: 03Feb 16 13:14:05 HS-DHTGLD3C kernel: Vendor: SAMSUNG Model: HD501LJ Rev: CR10Feb 16 13:14:05 HS-DHTGLD3C kernel: Type: Direct-Access ANSI SCSI revision: 03Feb 16 13:14:05 HS-DHTGLD3C kernel: Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = c14a3920Feb 16 13:14:05 HS-DHTGLD3C kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)Feb 16 13:14:05 HS-DHTGLD3C kernel: sda: Write Protect is offFeb 16 13:14:05 HS-DHTGLD3C kernel: SCSI device sda: drive cache: write backFeb 16 13:14:05 HS-DHTGLD3C kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)Feb 16 13:14:05 HS-DHTGLD3C kernel: sda: Write Protect is offFeb 16 13:14:05 HS-DHTGLD3C kernel: SCSI device sda: drive cache: write backFeb 16 13:14:05 HS-DHTGLD3C kernel: sda: sda1 sda2 sda4 < sda5 sda6 >Feb 16 13:14:05 HS-DHTGLD3C kernel: sd 0:0:0:0: Attached scsi disk sdaFeb 16 13:14:05 HS-DHTGLD3C kernel: Linux IAL (ERROR) : retry command host=1, bus=1 SCpnt = c14a3920Feb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)Feb 16 13:14:06 HS-DHTGLD3C kernel: sdb: Write Protect is offFeb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdb: drive cache: write backFeb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)Feb 16 13:14:06 HS-DHTGLD3C kernel: sdb: Write Protect is offFeb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdb: drive cache: write backFeb 16 13:14:06 HS-DHTGLD3C kernel: sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 >Feb 16 13:14:06 HS-DHTGLD3C kernel: sd 1:0:0:0: Attached scsi disk sdbFeb 16 13:14:06 HS-DHTGLD3C kernel: Linux IAL (ERROR) : retry command host=2, bus=2 SCpnt = c14a3920Feb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)Feb 16 13:14:06 HS-DHTGLD3C kernel: sdc: Write Protect is offFeb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdc: drive cache: write backFeb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)Feb 16 13:14:06 HS-DHTGLD3C kernel: sdc: Write Protect is offFeb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdc: drive cache: write backFeb 16 13:14:06 HS-DHTGLD3C kernel: sdc: sdc1 sdc2 sdc4 < sdc5 sdc6 >Feb 16 13:14:06 HS-DHTGLD3C kernel: sd 2:0:0:0: Attached scsi disk sdcFeb 16 13:14:06 HS-DHTGLD3C kernel: Linux IAL (ERROR) : retry command host=3, bus=3 SCpnt = c14a3920Feb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)Feb 16 13:14:06 HS-DHTGLD3C kernel: sdd: Write Protect is offFeb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdd: drive cache: write backFeb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)Feb 16 13:14:06 HS-DHTGLD3C kernel: sdd: Write Protect is offFeb 16 13:14:06 HS-DHTGLD3C kernel: SCSI device sdd: drive cache: write backFeb 16 13:14:06 HS-DHTGLD3C kernel: sdd: sdd1 sdd2 sdd4 < sdd5 sdd6 >Feb 16 13:14:06 HS-DHTGLD3C kernel: sd 3:0:0:0: Attached scsi disk sddFeb 16 13:14:06 HS-DHTGLD3C kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0Feb 16 13:14:06 HS-DHTGLD3C kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0Feb 16 13:14:06 HS-DHTGLD3C kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0Feb 16 13:14:06 HS-DHTGLD3C kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0Feb 16 13:14:06 HS-DHTGLD3C kernel: physmap flash device: 400000 at ff800000Feb 16 13:14:06 HS-DHTGLD3C kernel: >jedec_probeFeb 16 13:14:06 HS-DHTGLD3C kernel: Found: SST 39LF020Feb 16 13:14:06 HS-DHTGLD3C kernel: phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bankFeb 16 13:14:06 HS-DHTGLD3C kernel: number of JEDEC chips: 1Feb 16 13:14:06 HS-DHTGLD3C kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.Feb 16 13:14:06 HS-DHTGLD3C kernel: cmdlinepart partition parsing not availableFeb 16 13:14:06 HS-DHTGLD3C kernel: RedBoot partition parsing not availableFeb 16 13:14:06 HS-DHTGLD3C kernel: ehci_platform ehci_platform.4523: EHCI Platform Host ControllerFeb 16 13:14:06 HS-DHTGLD3C kernel: ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1Feb 16 13:14:06 HS-DHTGLD3C kernel: ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000Feb 16 13:14:06 HS-DHTGLD3C kernel: ehci_platform ehci_platform.4523: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004Feb 16 13:14:06 HS-DHTGLD3C kernel: usb usb1: configuration #1 chosen from 1 choiceFeb 16 13:14:06 HS-DHTGLD3C kernel: hub 1-0:1.0: USB hub foundFeb 16 13:14:06 HS-DHTGLD3C kernel: hub 1-0:1.0: 1 port detectedFeb 16 13:14:06 HS-DHTGLD3C kernel: USB Universal Host Controller Interface driver v2.3Feb 16 13:14:06 HS-DHTGLD3C kernel: Initializing USB Mass Storage driver...Feb 16 13:14:06 HS-DHTGLD3C kernel: usb 1-1: new high speed USB device using ehci_platform and address 2Feb 16 13:14:06 HS-DHTGLD3C kernel: usb 1-1: configuration #1 chosen from 1 choiceFeb 16 13:14:06 HS-DHTGLD3C kernel: hub 1-1:1.0: USB hub foundFeb 16 13:14:06 HS-DHTGLD3C kernel: hub 1-1:1.0: 4 ports detectedFeb 16 13:14:06 HS-DHTGLD3C kernel: usbcore: registered new driver usb-storageFeb 16 13:14:06 HS-DHTGLD3C kernel: USB Mass Storage support registered.Feb 16 13:14:06 HS-DHTGLD3C kernel: mice: PS/2 mouse device common for all miceFeb 16 13:14:06 HS-DHTGLD3C kernel: md: linear personality registered for level -1Feb 16 13:14:06 HS-DHTGLD3C kernel: md: raid0 personality registered for level 0Feb 16 13:14:06 HS-DHTGLD3C kernel: md: raid1 personality registered for level 1Feb 16 13:14:06 HS-DHTGLD3C kernel: md: raid5 personality registered for level 5Feb 16 13:14:06 HS-DHTGLD3C kernel: md: raid4 personality registered for level 4Feb 16 13:14:06 HS-DHTGLD3C kernel: raid5: measuring checksumming speedFeb 16 13:14:06 HS-DHTGLD3C kernel: arm4regs : 429.200 MB/secFeb 16 13:14:06 HS-DHTGLD3C kernel: 8regs : 329.600 MB/secFeb 16 13:14:06 HS-DHTGLD3C kernel: 32regs : 513.200 MB/secFeb 16 13:14:06 HS-DHTGLD3C kernel: raid5: using function: 32regs (513.200 MB/sec)Feb 16 13:14:06 HS-DHTGLD3C kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27Feb 16 13:14:06 HS-DHTGLD3C kernel: md: bitmap version 4.39Feb 16 13:14:06 HS-DHTGLD3C kernel: Kernel event proc (C) BUFFALO INC. V.1.00 installed.Feb 16 13:14:06 HS-DHTGLD3C kernel: MICON ctrl (C) BUFFALO INC. V.1.00 installed.Feb 16 13:14:06 HS-DHTGLD3C kernel: MICON V2 (C) BUFFALO INC. V.1.00 installed.Feb 16 13:14:06 HS-DHTGLD3C kernel: UPSDRV (C) BUFFALO INC. V.1.00 installed.Feb 16 13:14:06 HS-DHTGLD3C kernel: BUFFALO UPS Recover Function Initialized.Feb 16 13:14:06 HS-DHTGLD3C kernel: NET: Registered protocol family 2Feb 16 13:14:06 HS-DHTGLD3C kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)Feb 16 13:14:06 HS-DHTGLD3C kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)Feb 16 13:14:06 HS-DHTGLD3C kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)Feb 16 13:14:06 HS-DHTGLD3C kernel: TCP: Hash tables configured (established 8192 bind 8192)Feb 16 13:14:06 HS-DHTGLD3C kernel: TCP reno registeredFeb 16 13:14:06 HS-DHTGLD3C kernel: TCP bic registeredFeb 16 13:14:06 HS-DHTGLD3C kernel: NET: Registered protocol family 1Feb 16 13:14:06 HS-DHTGLD3C kernel: NET: Registered protocol family 17Feb 16 13:14:06 HS-DHTGLD3C kernel: md: Autodetecting RAID arrays.Feb 16 13:14:06 HS-DHTGLD3C kernel: md: autorun ...Feb 16 13:14:06 HS-DHTGLD3C kernel: md: ... autorun DONE.Feb 16 13:14:06 HS-DHTGLD3C kernel: RAMDISK: Compressed image found at block 0Feb 16 13:14:06 HS-DHTGLD3C kernel: VFS: Mounted root (ext2 filesystem).Feb 16 13:14:06 HS-DHTGLD3C kernel: md: md1 stopped.Feb 16 13:14:06 HS-DHTGLD3C kernel: md: bind<sdb2>Feb 16 13:14:06 HS-DHTGLD3C kernel: md: bind<sdc2>Feb 16 13:14:06 HS-DHTGLD3C kernel: md: bind<sdd2>Feb 16 13:14:06 HS-DHTGLD3C kernel: md: bind<sda2>Feb 16 13:14:06 HS-DHTGLD3C kernel: raid1: raid set md1 active with 4 out of 4 mirrorsFeb 16 13:14:06 HS-DHTGLD3C kernel: md: md0 stopped.Feb 16 13:14:06 HS-DHTGLD3C kernel: md: bind<sdb1>Feb 16 13:14:06 HS-DHTGLD3C kernel: md: bind<sdc1>Feb 16 13:14:06 HS-DHTGLD3C kernel: md: bind<sdd1>Feb 16 13:14:06 HS-DHTGLD3C kernel: md: bind<sda1>Feb 16 13:14:06 HS-DHTGLD3C kernel: raid1: raid set md0 active with 4 out of 4 mirrorsFeb 16 13:14:06 HS-DHTGLD3C kernel: XFS mounting filesystem md1Feb 16 13:14:06 HS-DHTGLD3C kernel: kjournald starting. Commit interval 5 secondsFeb 16 13:14:06 HS-DHTGLD3C kernel: EXT3 FS on md0, internal journalFeb 16 13:14:06 HS-DHTGLD3C kernel: EXT3-fs: mounted filesystem with ordered data mode.Feb 16 13:14:07 HS-DHTGLD3C kernel: XFS mounting filesystem md1Feb 16 13:14:07 HS-DHTGLD3C kernel: XFS mounting filesystem md1Feb 16 13:14:07 HS-DHTGLD3C kernel: VFS: Mounted root (xfs filesystem).Feb 16 13:14:07 HS-DHTGLD3C kernel: Trying to move old root to /initrd ... /initrd does not exist. Ignored.Feb 16 13:14:07 HS-DHTGLD3C kernel: Unmounting old rootFeb 16 13:14:07 HS-DHTGLD3C kernel: Trying to free ramdisk memory ... okayFeb 16 13:14:07 HS-DHTGLD3C kernel: Freeing init memory: 112KFeb 16 13:14:07 HS-DHTGLD3C kernel: Adding 136512k swap on /dev/disk1_5. Priority:-1 extents:1 across:136512kFeb 16 13:14:07 HS-DHTGLD3C kernel: Adding 136512k swap on /dev/disk2_5. Priority:-2 extents:1 across:136512kFeb 16 13:14:07 HS-DHTGLD3C kernel: Adding 136512k swap on /dev/disk3_5. Priority:-3 extents:1 across:136512kFeb 16 13:14:07 HS-DHTGLD3C kernel: Adding 136512k swap on /dev/disk4_5. Priority:-4 extents:1 across:136512kFeb 16 13:14:07 HS-DHTGLD3C kernel: kjournald starting. Commit interval 5 secondsFeb 16 13:14:07 HS-DHTGLD3C kernel: EXT3 FS on md0, internal journalFeb 16 13:14:07 HS-DHTGLD3C kernel: EXT3-fs: mounted filesystem with ordered data mode.Feb 16 13:14:07 HS-DHTGLD3C kernel: eth0: link downFeb 16 13:14:07 HS-DHTGLD3C kernel: eth0: link up<5>, full duplex<5>, speed 1 Gbps<5>Feb 16 13:14:07 HS-DHTGLD3C kernel: md: md2 stopped.Feb 16 13:14:07 HS-DHTGLD3C kernel: md: bind<sdb6>Feb 16 13:14:07 HS-DHTGLD3C kernel: md: bind<sdc6>Feb 16 13:14:07 HS-DHTGLD3C kernel: md: bind<sdd6>Feb 16 13:14:07 HS-DHTGLD3C kernel: md: bind<sda6>Feb 16 13:14:07 HS-DHTGLD3C kernel: raid5: device sda6 operational as raid disk 0Feb 16 13:14:07 HS-DHTGLD3C kernel: raid5: device sdd6 operational as raid disk 3Feb 16 13:14:07 HS-DHTGLD3C kernel: raid5: device sdc6 operational as raid disk 2Feb 16 13:14:07 HS-DHTGLD3C kernel: raid5: device sdb6 operational as raid disk 1Feb 16 13:14:07 HS-DHTGLD3C kernel: raid5: allocated 4210kB for md2Feb 16 13:14:07 HS-DHTGLD3C kernel: raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2Feb 16 13:14:07 HS-DHTGLD3C kernel: RAID5 conf printout:Feb 16 13:14:07 HS-DHTGLD3C kernel: --- rd:4 wd:4 fd:0Feb 16 13:14:07 HS-DHTGLD3C kernel: disk 0, o:1, dev:sda6Feb 16 13:14:07 HS-DHTGLD3C kernel: disk 1, o:1, dev:sdb6Feb 16 13:14:07 HS-DHTGLD3C kernel: disk 2, o:1, dev:sdc6Feb 16 13:14:07 HS-DHTGLD3C kernel: disk 3, o:1, dev:sdd6Feb 16 13:14:08 HS-DHTGLD3C kernel: XFS mounting filesystem md2Feb 16 13:14:10 HS-DHTGLD3C sshd[964]: Server listening on 0.0.0.0 port 22.Feb 16 13:14:15 HS-DHTGLD3C clientUtil_server[1089]: startup daemon Feb 16 13:14:15 HS-DHTGLD3C clientUtil_server[1089]: assigned intreface eth0 Feb 16 13:14:15 HS-DHTGLD3C clientUtil_server[1089]: clientUtil_server Ver.1.02Feb 16 13:14:15 HS-DHTGLD3C daemonwatch[1095]: daemonwatch ver.1.01Feb 16 13:14:15 HS-DHTGLD3C lsprcvd[1093]: lsprcvd started.Feb 16 13:14:16 HS-DHTGLD3C kernel: usbcore: registered new driver usblpFeb 16 13:14:16 HS-DHTGLD3C kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driverFeb 16 13:14:16 HS-DHTGLD3C root: TeraStation VERSION=1.10 SUBVERSION=HDD 2.07Feb 16 13:14:18 HS-DHTGLD3C errormon[1214]: errormon-ver.1.01 started Feb 16 13:14:18 HS-DHTGLD3C TeraStation: Started errormonFeb 16 13:14:18 HS-DHTGLD3C TeraStation: #[miconapl.mcon_get_version] mcon_version=TS-HTGL/R5Ver1.0Feb 16 13:17:34 HS-DHTGLD3C nmbd[1045]: [2014/02/16 13:17:34, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396) Feb 16 13:17:34 HS-DHTGLD3C nmbd[1045]: ***** Feb 16 13:17:34 HS-DHTGLD3C nmbd[1045]: Feb 16 13:17:34 HS-DHTGLD3C nmbd[1045]: Samba name server HS-DHTGLD3C is now a local master browser for workgroup STEIN on subnet 192.168.1.102 Feb 16 13:17:34 HS-DHTGLD3C nmbd[1045]: Feb 16 13:17:34 HS-DHTGLD3C nmbd[1045]: ***** Feb 16 13:19:45 HS-DHTGLD3C sshd[7446]: Accepted password for root from 192.168.1.7 port 61083 ssh2Feb 16 13:19:45 HS-DHTGLD3C sshd[7446]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directoryFeb 16 13:19:45 HS-DHTGLD3C sshd[7446]: lastlog_openseek: /var/log/lastlog is not a file or directory!Feb 16 13:19:45 HS-DHTGLD3C sshd[7555]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directoryFeb 16 13:19:45 HS-DHTGLD3C sshd[7555]: lastlog_openseek: /var/log/lastlog is not a file or directory!Feb 16 17:03:41 HS-DHTGLD3C sshd[27258]: Accepted password for root from 192.168.1.7 port 49673 ssh2Feb 16 17:03:41 HS-DHTGLD3C sshd[27258]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directoryFeb 16 17:03:41 HS-DHTGLD3C sshd[27258]: lastlog_openseek: /var/log/lastlog is not a file or directory!Feb 16 17:03:41 HS-DHTGLD3C sshd[27369]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directoryFeb 16 17:03:41 HS-DHTGLD3C sshd[27369]: lastlog_openseek: /var/log/lastlog is not a file or directory!Feb 17 00:07:06 HS-DHTGLD3C ntpdate[6983]: step time server 162.243.55.105 offset 0.010799 secFeb 17 00:07:06 HS-DHTGLD3C linkstation: [Success] Sync to ntp serverFeb 17 11:17:41 HS-DHTGLD3C sshd[31556]: Accepted password for root from 192.168.1.7 port 50541 ssh2Feb 17 11:17:41 HS-DHTGLD3C sshd[31556]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directoryFeb 17 11:17:41 HS-DHTGLD3C sshd[31556]: lastlog_openseek: /var/log/lastlog is not a file or directory!Feb 17 11:17:41 HS-DHTGLD3C sshd[31672]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directoryFeb 17 11:17:41 HS-DHTGLD3C sshd[31672]: lastlog_openseek: /var/log/lastlog is not a file or directory!Thanks!
  5. Hi all, I'm trying to get btsync running on a Buffalo TS Live. I managed to d/l and install and got it to start with some help from this forum on setting the alignment for arm. Now when running, I get the message that btsync is being forked to the background. Then it disappears. I can't access the the webui. PS doesnt show the process as running and trying to kill the pid given at startup tells me that the process doesn't exist. The system log shows nothing at all. I turned on debugging and only get this: sync.log [20140216 13:22:07.217] total physical memory -1 max disk cache 2097152[20140216 13:22:07.221] Using IP address 192.168.1.102[20140216 13:22:07.287] test sha1: AE5B <cut for security>[20140216 13:22:07.287] test sha2: 630D <cut for security>[20140216 13:22:07.287] test aes: 0A94 <cut for security>I think maybe I just don't have enough memory. Here's the results of free. ~# free total used free shared buffers Mem: 126080 90372 35708 0 108 Swap: 546048 0 546048Total: 672128 90372 581756Thank you for any help.
  6. Easy enough and worked like a charm. Thanks
  7. I figured I'd be fighting with ports and permissions and the like, but I never even got that far. As soon as I go to run the binary I get an alignment error. I don't know what to do with that. The TSLive is an ARM9 system. Here are the particulars: # uname -aLinux HS-DHTGLD3C 2.6.16.16-arm1 #3 Wed Mar 7 13:21:58 JST 2007 armv5tejl unknownI installed using this method I found in these forums. # wget http://btsync.s3-website-us-east-1.amazonaws.com/btsync_arm.tar.gz# tar zxvf btsync_arm.tar.gz# chmod u+x btsync# ./btsyncAlignment error#I haven't dealt with Linux directly in a long time and have no idea what to do with this. Google didn't return anything useful for me. Any suggestions are appreciated. Thanks, Fred