Anh Huynh

Members
  • Posts

    28
  • Joined

  • Last visited

Everything posted by Anh Huynh

  1. Hi Helen, I tried the advanced mode. I also tried to follow this article https://help.getsync.com/hc/en-us/articles/209643433-SD-card-gimmicks-on-Android-. I only got error "permission denied" or "can't open the destinatin folder". Thanks,
  2. I have tried different settings (*) but I can't get btsync to work store its data on an external disk on my sony xperia xa dual. Any ideas? (*) Turn on Debug mode with a tricky subject in Support; Enable phone debug mode; Stop/Restart the app, reboot the phone, ....
  3. in the previous verions there're options to update secret keys of shared folders. I can't see this feature in the latest version of RS (tested on PC version). Is this feature disabled or is there any requirement/trick? Thanks,
  4. I haven't tried version 2.x at hom. I will try if version 2.x can be supported by my tool (https://github.com/icy/cnystb).
  5. There are also Alpine-based images , but this is not for Alpine fans, as the images are based on Slitaz linux. The result images are quite small (24MB for the latest version 2.4.1). See image attached. Disclaimer: These images are 32-bit versions because my base image `icymatter/slitaz40-minimal` is an 32-bit image) Images on Dockerhub: (https://hub.docker.com/u/icymatter/) * 1.3: icymatter/slitaz40-btsync13 * 1.4: icymatter/slitaz40-btsync14 * 2.4: icymatter/slitaz40-btsync24 Hope this helps
  6. Hi, I'm running btsync using Container. You can check my instructions here https://github.com/icy/docker/blob/master/doc/README.btsync.md
  7. 10 folders limit. ok I quit. It's time to make btsync network more available for their paid users. Let's go syncthing.
  8. That's good. But how can you use that on .... Linux?
  9. Not complete actually. you can use "folder_rescan_interval" from config files, and folder settings still come from web UI.
  10. here is an example { "device_name": "example.net", "listening_port" : 1234, // 0 - randomize port /* storage_path dir contains auxilliary app files if no storage_path field: .sync dir created in the directory where binary is located. otherwise user-defined directory will be used */ "storage_path" : "/home/btsync/data/", "folder_rescan_interval": 300,}To start the daemon, use /home/btsync/bin/btsync --config /path/to/btsync.confI use supervisor to monitor btsync process. So I start with /home/btsync/bin/btsync --config /path/to/btsync.conf --nodaemonbecause supervisor already has daemon support.
  11. aha this is the most confusing thing ; I also has the same problem. The only way to avoid this: don't use that feature
  12. My sony xperia X8 is quite old , and it's unable to upgrade its O My sony xperia X8 is quite old , and it's unable to upgrade its O
  13. it's not about the speed; it's about to have two-way synchronization for the "Camera backup" folder on Android phone. And that really makes the "backup folder" to work as normal sync.
  14. I love synchthing. It's not very stable at the moment. When it's ready. I move off btsync
  15. +1 . I am still on 1.3. Moreover, 1.4 is not available on some old devices (sony xperia x8). The bad news is that after upgrading 1.3 -> 1.4, I can't go back. I did that once and I was so disappointed. Forcing 1.4 -> 1.3 will cause btsync go into an infinite loop lolz
  16. On android, you can export btsync configuration to a .zip file. Then open the .zip file, locate the file "sync.dat". It's in bencode format, and you can read it, for example ruby -rbencode -e 'ARGV.each {|f| a = File::bdecode(f); puts a }' -- .sync/sync.dat [/code otherwise, use a hexeditor. The key is to locate the "READ-WRITE" key of the backup folder. After you get the key, go and set up a two ways synchronization between your smart-phones and your PCs. And forget the noisy backup feature
  17. I disable all "autosync" for 3 shared folders on my android phone (zenfone A450). btsync still uses 10% of battery, twice as firefox (4%) and 1/3 of screen (37%). So I remove #btsync from my android....
  18. List of domains may be accessed by btsync $ strings /home/btsync/bin/btsync \ | grep -E '[^ ]{3,}\.com' \ | sed -e 's#.*://##g' \ -e 's#\.com.*#.com#g' \ | sort -u apps.bittorrent.com bench.utorrent.com config.usyncapp.com download.utorrent.com gui.com link.getsync.com raptor.utorrent.com remote.utorrent.com router.bittorrent.com router.utorrent.com search.conduit.com syncdev.bittorrent.com sync-help.bittorrent.com tracker.openbittorrent.com tracker.publicbt.com update.utorrent.com www.bittorrent.com www.usyncapp.com
  19. I have a problem with link sharing. When I open on the link , select "I already have btsync", I will be redirected to a "btsync://foobar" link whose protocol is unknown on my Linux.
  20. New version of btsync (1.4.72) is fully supported
  21. Encrypted key is now supported $ ./api.sh key/get encrypt=1|json_pp { "erosecret" : "FMZXEH4PWSA62N7LAJNHJV57O42Xxxxx", "rosecret" : "EMZXEH4PWSA62N7LAJNHJV57O42X5PEFSZHBBS5BN7BNVPNNHF4LFVxxxx", "secret" : "DZ4PN4GAEBSHBEOGDLVKQS5DIKXPCxxxx" }
  22. New methods * `os/dir/create`: create a directory on remote system _(dangerous!)_ * `folder/create`: create new share folder * `folder/host/get`: return list of known hosts of a shared folder * `key/onetime/get`: return a on-time key for a shared folder
  23. btsync uses the same domain http://config.usyncapp.com/ for both things (1) get a list of tracker/relays (2) report some user's information