Andy+

Members
  • Content Count

    387
  • Joined

  • Last visited

Everything posted by Andy+

  1. To rename from v2.7.x right click on a peer and choose settings and most above you see the peer name and a little pencil on right side. Click on it and chosse a new name. For ignoring #recycle maybe try ?recycle or *recycle, I think some tests are needed for that https://help.resilio.com/hc/en-us/articles/205458165-Ignoring-files-in-Sync-Ignore-List-
  2. If selective sync is not used, a 1:1 copy is made on the connected peer side. On all 2 peers are a synced dataset. With 3 peers it is triple. That is so wanted. If selective sync is set, there are no copies on the affected peers, only the directory structure and placeholders for the files. Then the files or directories must be activated if the files are to be physically available on the respective peer. That is also wanted. To share something, it doesn't have to be an extended folder, you can also share standard folders. But then the keys have to be exchanged. Maybe you are work
  3. Its maybe a challenge for RPI because of resources Resilio needs, if you have a lot of files and folders. But at first that needs some tests by you.
  4. with which NAS, it means hardware?
  5. So I have understood you have on Resilio side /sync/Music/Music /sync/Music/Master /sync/Music/TestSync so on server side you have /srv/dev-disk-by-label-Hippo/Music/Music/Music /srv/dev-disk-by-label-Hippo/Music/Music/Master /srv/dev-disk-by-label-Hippo/Music/Music/TestSync That is what I see with the sequence /srv/dev-disk-by-label-Hippo/Music:/sync
  6. If I have only "Last transferred", the content dissapear also. If I switch off and on, it comes back.
  7. It could be different issues. Resilio must indexing all content, normally you see such activities in the GUI. By right click with mouse to the coloumn line you can switch on different coloumns, among others the number of files etc. This must increase up to the current number of files. If you have no permission message and maybe a red exclamation mark beside, I think this is not the problem.
  8. Maybe is a thing of permissions. The user of Resilio calls normally "rslsync", what I know. If rslsync is member of administrator group, normally you see that folders. Otherwise you give rslsync all the needed permissions.
  9. Regarding a "normal" linux server image I have no experience, since I use on all my Synology┬┤s a installation package, which make all basic settings. So maybe also the mounting of volumes and so one, I dont know. Maybe you find in the internet some instructions for that, such as https://help.resilio.com/hc/en-us/articles/206178924-Installing-Sync-package-on-Linux and other direct download links
  10. Left side of above sequence is your folder on your server, after the ":" is /sync and this folder is inside of your container. For additional folder you read https://hub.docker.com/r/resilio/sync about "Extra directories". Instead of that is possible to use the sequence /srv:/sync and you make from here your subfolders /dev-disk-by-label-Hippo /dev-disk-by-label-Hippo/Music /dev-disk-by-label-Hippo/Music/TestSync and maybe /dev-disk-by-label-Hippo/TestSync2 So you have in your container also all that folders, which you can see also in the GUI.
  11. With the free version is only possible to use and exchange the key of each peer. For that you can also only use the standard peer type. You choose on server side a folder to set up a peer. After that you share that peer and copy the key and that key you use on your mobile phone to connect. If you have a license, you can share on your server the identity of your mobile phone and if that connected you will find a list of peers of each others are connected to that identity.
  12. I can confirm for 3 Synology┬┤s DS1815+, DS415+, DS412+ and I think, if your device is listed there https://help.resilio.com/hc/en-us/articles/206664850 and it runs in the free mode, also a license will running, why not. If not, you have the support of Resilio.
  13. When can we expect v2.7.2? If you switch between the "normal" installation and the installation as a service, you should note that in the directories C:\Users\.......\AppData\Roaming\Resilio Sync C:\Users\.......\AppData\Roaming\Resilio Sync Service the files are stored accordingly. I haven't done it for a long time, but basically the working files should be able to be copied back and forth to have the same condition in both. Just test it and make a backup beforehand if necessary.
  14. For that I use a USB stick, which I connect with my computer: Step 1: Step 2: Step 3: Step 4:
  15. If you want to have an external drive on your computer, you must connect that so that a drive is assigned, e.g. "H:\". This is not a network drive, but a physical drive, which can also be found by Resilio. In Resilio the drive is displayed when you create a connection and you can connect a peer with it.
  16. Then your system works a little differently. I only have my own servers, some Synologys. Due to my configuration, I have the photos in the sync directory on my server that I want. I have, let's say 1000 photos in it, I move on my server e.g. 980 of them in other folders and 20 remain in the sync directory. These 20 remain on my smartphone also, the other 980 are deleted from Resilio and the storage becomes free. That is my goal and that is how it works. Test Syncthing in your case and I recommen to test the "Syncthing-Fork" APP beside of the normal official APP of it, This APP a
  17. I use Syncthing in parallel on all my Synologys, Windows computers, Androids. I had problems with the Resilio APP for a long time, so I was forced to use Syncthing in parallel among because of this. Its also great. Instead of the camera "tool" of the Resilio APP I use a normal peer between the standard folder on the smartphone and a folder on a host. Files are excluded via the ignore list, this list can be saved beforehand. Then only the files that you actually want are stored on the host. I also do not use the standard camera "tool", because sometimes I delete pictures again i
  18. It can also be done more conventionally. Instead of the camera "tool" I use a normal peer between the standard folder on the smartphone and a folder on a host. Files are excluded via the ignore list, this list can be saved beforehand. Then only the files that you actually want are stored on the host. I also do not use the standard camera "tool", because sometimes I delete pictures again if they have become blurred or are simply nothing, etc.
  19. Same as before. I ask for a comment.
  20. Maybe we get v2.7.2 with that coming update.
  21. Maybe we get v2.7.2 with that coming update.
  22. If you have from all a backup, you can try to stop Resilio, delete the databases and start Resilio again, to rebuild the database.