Sync'ing doesn't happen


Wurlitzer

Recommended Posts

Hi,

I installed BitTorrent Sync on two Linux servers.

The first server has a 6GB folder, spread on ~100k files.

The second server is configured with a read-only key.

Both web interfaces show that they are connected to each other, but no sync'ing is happening.

The log files don't contain anything alarming.

What could I be doing wrong?

Thanks

Link to comment
Share on other sites

The Linux client doesn't seem to have any boolean for enabling or disabling logging.

Output of $./btsync --help


BitTorrent Sync 1.0.116
Usage:
btsync [--config <path>] [--nodaemon] [--generate-secret] [--dump-sample-config] [--help] [--get-ro-secret <secret>]
Options:
--config - location and name of configuration file
--nodaemon - do not use daemon mode
--generate-secret - generate shared secret
--get-ro-secret - get read only secret for existing master secret
--dump-sample-config - dump sample config file
--help - print this message and exit

A logfile is created by default in /.sync/sync.log and contains what's shown in my previous post.

Link to comment
Share on other sites

I said "see above link for more information". If you look at http://forum.bittorr...-syncapp-issue/ then you'll see how to enable debug logging (look at Step 1).

I'm using the Linux version, and I tried it and it works. Just create a file called debug.txt in .sync directory and write "FFFF" to it. Probably needs btsync restart.

My bad. Debugging is enabled now. I'll let it run run for 15 min before sending the log.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.