RomanZ

Latest Desktop Build 1.3.106

Recommended Posts

Please feel free to use build 1.3.106.

 

Change log:

- Fixed issue with inability to type in path manually in WebUI

- Indexing is shown in WebUI when BTSync indexes files

- Overwrite checkbox brought back for RO secrets in WebUI

- Fixed issue with "#" symbol in the folder picker in WebUI

- Fixed issue with encrypted secret not displayed in WebUI

- Fixed issue with short / long path shown in WebUI

- Fixed LAN discovery issue when many folders and files are added to sync dirs

- Fixed continual indexing issue in certain cases

- Minor cosmetic fixes

 

Previous build change log.

Share this post


Link to post
Share on other sites

Hi

 

I noticed that you have 2 different 1.3.106 (Windows) versions available for download. The first one is from the link in this post:

 

http://syncapp.bittorrent.com/1.3.106/BTSync-1.3.106.exe

 

This one is 3,020,136 bytes (3,022,848 on disk) - file version 1.3.106

 

 

However if I download the latest stable version from your stable DL link:

 

http://download-lb.utorrent.com/endpoint/btsync/os/windows/track/stable

 

This one is 3,023,976 bytes (3,026,944 on disk) - file version 1.3.106

 

 

Which is the final one and what's the difference? BTW, I noticed the same issue with 1.3.105.

Edited by Neinstein

Share this post


Link to post
Share on other sites

Hi

 

I noticed that you have 2 different 1.3.106 (Windows) versions available for download. The first one is from the link in this post:

 

http://syncapp.bittorrent.com/1.3.106/BTSync-1.3.106.exe

 

This one is 3,020,136 bytes (3,022,848 on disk) - file version 1.3.106

 

 

However if I download the latest stable version from your stable DL link:

 

http://download-lb.utorrent.com/endpoint/btsync/os/windows/track/stable

 

This one is 3,023,976 bytes (3,026,944 on disk) - file version 1.3.106

 

 

Which is the final one and what's the difference? BTW, I noticed the same issue with 1.3.105.

True, what're the differences?

Share this post


Link to post
Share on other sites

And why can't I see the full paths in the WebGUI? In the last version it was a "bug"?! that they sometimes disappeared but now I have to hover over every one of them to see where the files are located :/

Share this post


Link to post
Share on other sites

still would like to be able to expand the list of connected devices instead of interacting with them modally. In my case, expanding them all would only take 24 lines, so I'd like all my connected devices to be visible at one time.

Share this post


Link to post
Share on other sites

@Neinstein, @Frederick888,

 

Both files are good and produced by BitTorrent. The file on official download page contains one additional resource in its body which is responsible for displaying slightly different on-boarding screen (the initial screen after installation). No functional changes.

 

@Moe

They were intended to show in a short format. Thanks for the feedback.

 

@JimmyTheSaint

Got you, thanks for the feedback. I'll deliver it to new WebUI designers.

Share this post


Link to post
Share on other sites

I am new to BTsync.

 

To install 1.3.106, can I just install over 1.3.105?

 

I have 1.3.105 installed on a couple of Macs and a DroboFS.

 

If installed over the top, will all my Secrets be ok?

 

Thanks

 

 

Share this post


Link to post
Share on other sites

Hi, please add full folder path and folder sync state to WebUI.

I have 24 folder with same name and it's very difficult to know the sync state of each one.

 

@kattunga2 - please add your voice to this thread in the Feature Requests forum instead.

Share this post


Link to post
Share on other sites

Why do u guys need to constantly create a new thread each time a new build is released?!?

If a new version was also released on the auto-update, I wouldn't care of this problem, but since that is not happening for the majority of the releases (only the big ones), now I have to remind me to enter the forum to see if there's a new thread of a new build...

 

I think it's better to have only one thread for all releases of Bitsync... or at least only a thread per major release of bitsync... it would be much better to track all the new releases... Each time a new version was release, only had to edit the thread name and the 1st post with changelog and some more info.

 

Time to choose, auto-update all versions or make a single thread for all versions!!!

Share this post


Link to post
Share on other sites

@onesolo

 

Every version has it's own problems. I see no point in flushing all of them into hundred-pages-topic. Every release gets it's own topic.

 

As for the auto-update issue - it will be fixed soon. We plan to publish new version to the forum slightly (1-2 weeks) ahead of auto-update. So then you can rely on auto-update.

Share this post


Link to post
Share on other sites

Updating the Macs to 1.3.106 went without a hitch.  I just installed over the top of the existing 1.3.106.

 

The DroboFS has 1.3.105 running on it.  It was installed using the procedure found here:

 

http://www.droboports.com/app-repository/btsync-1-0-132

 

The first time through, it installed 1.2.something.  It was noticed at the gui.

 

I reinstalled using the procedure in the link, but replaced btsync binary with 1.3.105, and patched permissions before launching the service.

 

DroboFS uses a common Framework for all of the DroboApps.  This can be seen in the link above.

 

My question now is this:  Now that I have 1.3.105 installed, can I just stop the service and replace the btsync binary in place?

 

Thanks 

Edited by BigCookie

Share this post


Link to post
Share on other sites
Guest proactiveservices

Why do u guys need to constantly create a new thread each time a new build is released?!?

If a new version was also released on the auto-update, I wouldn't care of this problem, but since that is not happening for the majority of the releases (only the big ones), now I have to remind me to enter the forum to see if there's a new thread of a new build...

 

 

I use the "recently updated posts" link from time to time - I haven't missed an update thread yet. However, it would be quite good to have a "Current build" thread, and when a new build is created, that thread is moved to one for that particular version.

Share this post


Link to post
Share on other sites

@proactiveservices

Once auto-updates will track the latest version (even with one week delay) there will not be need to keep "The latest" thread.

Share this post


Link to post
Share on other sites

The DroboFS has 1.3.105 running on it.  It was installed using the procedure found here:

 

http://www.droboports.com/app-repository/btsync-1-0-132

My question now is this:  Now that I have 1.3.105 installed, can I just stop the service and replace the btsync binary in place?

 

Thanks 

 

I have a Drobo 5N and that is my script for updating the client on there via SSH

cd /mnt/DroboFS/Shares/DroboApps/btsync./service.sh stopmkdir -p etc data sbinwget -O btsync_arm.tar.gz http://syncapp.bittorrent.com/1.3.106/btsync_arm-1.3.106.tar.gztar zxf btsync_arm.tar.gzchmod a+x btsyncmv btsync sbin/rm btsync_arm.tar.gz/mnt/DroboFS/Shares/DroboApps/btsync/service.sh start

Hope this helps

Share this post


Link to post
Share on other sites

When I try to download the Windows build from the link provided, Chrome is telling me that the file will damage my PC.

Thought you might wanna know that to sort it out

Share this post


Link to post
Share on other sites

We plan to publish new version to the forum slightly (1-2 weeks) ahead of auto-update. So then you can rely on auto-update.

 

My Windows 8.1 client is currently at version 1.3.94 (2 versions behind)

 

I'm happy for the auto-update (user is prompted to update version) to be like 1-2 weeks after it is posted to forum, but what I'm not happy about is that when I press "Check Now" I'm greeted with the message "Client version is up to date." only to check the forum to find I am more up to date version available, I am quite disgruntled to find I have to go through the process of updating my BT sync manually when I want the current release now.

 

If a newer version is published to the forum and I press "Check Now" I expect to be given the newest version available to download from the main page at that time. As it stands, that does not happen and it tells me I am up to date.

 

That is all

Share this post


Link to post
Share on other sites

@acDCuk,

 

Please remember that Sync is presently in "beta". As such, not every new beta build is pushed via auto-update at present. This will change once Sync leaves beta, however, given the current "beta" nature of the software, it's better that new Beta builds have a limited release initially are not pushed out to everyone via auto-update the minute they become available.

 

Whilst the developers test each beta release "in house" first through their QA process, not "mass releasing" beta builds, but instead announcing them here to the forum readership in the first instance allow the developers to gauge the stability of each before deciding which should then be pushed to all users via auto-update.

 

FYI, there are no functional changes/new features between builds 1.3.94 and 1.3.106. Essentially, users for whom 1.3.94 is working perfectly fine have not been missing any "new features" by not knowing about 1.3.106.

 

If the team discover a major issue/bug, which could impact on a large percentage of users, of course an update will be pushed out to all users relatively quickly. However, in reality, the bugs that have been fixed between 1.3.94 and 1.3.106 are relatively uncommon "specific use" cases that won't impact on the vast majority of user's every day use of Sync, which is why these beta builds haven't been pushed via auto-update.

Share this post


Link to post
Share on other sites

@moe. Thanks for the Drobo update script.

I know there is a hidden .syncignore file installed on the Mac version. I looked at the contents of it.

On the PDF files in my documents directory, it seems to be passing filename.pdf/apple.com.finderinfo. Do I really need to be syncing thar?

I know that is Apple metadata. I really just want to sync the content of the PDF.

Any problem with not syncing metadata?

What are most Mac users doing?

Thanks.

Dennis

Share this post


Link to post
Share on other sites

Hi Dennis.

 

No problem ignoring finder metadata, the file themselves will sync ok, you just won't sync things like the Tags applied to them.

Share this post


Link to post
Share on other sites

Can anyone elaborate on "Fixed continual indexing issue in certain cases"

Does this fix the issue of endlessly trying to sync xattrs between Linux and OS X?  Can I revert the exceptions in .SyncIgnore?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.