No Peers, Synology 1.4.83


Recommended Posts

I am using the 1.4.83 BETA install on a Synology DS412+ and my Windows BTSYNC 1.4.83.


I am unable to setup a sync directory on the Synology using a read-only key coming from my Windows. Here are the steps I am following and the behavior: (This may or not be important, but both devices already have matching directories)


1. Remove the sync directory from both Synology and Windows (including deleting the .sync directories)

2. In Windows click "Add Folder", and close the "Share" screen that follows

3. Open the "Preferences" of the sync directory that I just added

4. Copy the "Read Only Key" to the clipboard

5. In the BTSync interface on the Synology, click "Enter a link or key"

6. Paste the read only key

7. Navigate to the desired directory

8. Press "Ok" when warning that the directory is not empty (because it already contains the files)


At this point both BTSync applications will index the files and sit at "No Peers".


I believe the problem is that the Synology sync directory was not setup with the Read Only key, because if I open the sync folder preferences on the Synology side, I see a Read & Write key and a Read Only key neither of which resemble the Read Only key that I pasted in step 6.


Am I doing something wrong here?

Link to comment
Share on other sites

My logs are filled with this, possibly unrelated:


[20141010 22:32:03.031] UPnP: Could not map UPnP Port on this pass, retrying.
[20141010 22:32:05.006] UPnP: Device error "": (-2)
[20141010 22:32:05.181] UPnP: Device error "": (-2)
[20141010 22:32:06.018] UPnP: Device error "": (-2)
[20141010 22:32:24.801] UPnP: Device error "": (110) offline (timed out)
[20141010 22:32:27.019] UPnP: Unable to map port with UPnP. is my Synology is a SharX Wifi Webcam is a Buffalo Router is a DLINK Switch
I found this record within the other repeating lines:
[20141010 22:21:24.804] UPnP: Device error "": (-2) is the desktop that I'm actually trying to sync with... but this line didn't get logged during the steps I mentioned above. I tested it again.
Link to comment
Share on other sites

  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.