HOWTO freenas 11.1 U2 Iocage Jail Install

[prasanth]

 

Working on the iocage install and it appears to be running fine, but still can't access the webui

Crossposting on the freenas forum as well

Here's what I'm doing:

 

Initial setup

# make temp file that will cause iocage to install some packages
echo '{"pkgs":["ca_root_nss"]}' > /tmp/pkg.json
# create jail
iocage create -n "rslsync" -p /tmp/pkg.json -r 11.1-RELEASE ip4_addr="vnet0|yourip/24" defaultrouter="routerip" vnet="on" allow_raw_sockets="1" boot="on"
# remove the temp file
rm /tmp/pkg.json

 

 

 

Data directory config

# map config and data storage outside of jail
iocage fstab -a rslsync /mnt/syncdatadirectory /mnt/syncdata nullfs rw 0 0
iocage fstab -a rslsync /mnt/syncconfigdirectory /config nullfs rw 0 0
# link python
iocage exec rslsync ln -s /usr/local/bin/python2.7 /usr/bin/python
iocage exec rslsync ln -s /usr/local/bin/python2.7 /usr/bin/python2

 

 

actual install of resilio

# download and unpack resilio from website
iocage exec rslsync mkdir /usr/local/rslsync
iocage exec rslsync "fetch https://download-cdn.resilio.com/stable/FreeBSD-x64/resilio-sync_freebsd_x64.tar.gz -o /usr/local/rslsync/"
iocage exec rslsync "tar -xzvf /usr/local/rslsync/resilio-sync_freebsd_x64.tar.gz -C /usr/local/rslsync/"
iocage exec rslsync rm /usr/local/rslsync/resilio-sync_freebsd_x64.tar.gz

 

 

 

user and directory setup

# add rslsync user using pid:uid used by rslsync in the past
iocage exec rslsync "pw user add rslsync -c rslsync -u 817 -d /nonexistent -s /usr/bin/nologin"
# change ownership of config and data directories
iocage exec rslsync chown -R rslsync:rslsync /mnt/syncdata /config
# Link the rslsync config file to one from config directory outside of jail
##if using an old btsync install in your config dir copy the old config to new one
#iocage exec rslsync cp -s /config/btsync.conf /config/sync.conf
iocage exec rslsync ln -s /config/sync.conf /usr/local/etc/sync.conf
# create the run command directory and file
iocage exec rslsync mkdir /usr/local/etc/rc.d
iocage exec rslsync "ee /usr/local/etc/rc.d/rslsync"

 

 

 

Put the following into the rc.d file

#!/bin/sh
#
# PROVIDE: resilio
# REQUIRE: LOGIN DAEMON NETWORKING
# KEYWORD: shutdown
#
# To enable Resilio, add this line to your /etc/rc.conf:
#
# resilio_enable="YES"
#
# And optionally these line:
#
# resilio_user="username" # Default is "root"
# resilio_bin="/path/to/resilio" # Default is "/usr/local/share/rslsync"

. /etc/rc.subr

name="rslsync"
rcvar="resilio_enable"

load_rc_config $name

required_files=$resilio_bin

: ${resilio_enable="NO"}
: ${resilio_user="rslsync"}
: ${resilio_bin="/usr/local/sbin/rslsync"}

command=$resilio_bin

run_rc_command "$1"

 

use esc to get out of the editor and exit+save by pressing 'a' twice

 

 

finalizing setup and startup

#move the executable from rslsync to sbin
iocage exec rslsync mv /usr/local/rslsync/rslsync /usr/local/sbin/
# make the run command file executable
iocage exec rslsync chmod u+x /usr/local/etc/rc.d/rslsync
#enable start up of rslsync and start
iocage exec rslsync sysrc "resilio_enable="YES""
iocage exec rslsync service rslsync start

 

 

 

to get around vnet errors that current version of freenas seems to be causing(not sure if this is needed for sync or not)

iocage exec rslsync 'sysrc ifconfig_epair0_name="epair0b"' 

 

[prasanth]

Here are the updated instructions where everything seems to be working

https://gist.github.com/wassupdoc/f57e65d2a5f52101a5ec6f65355e85c2