Mattfink

ZyXel NSA325v2 upgrade btsync 2.2.6 to rslsync 2.5.12

Recommended Posts

Thought I would share this in case anyone else has the same problem. 

My old and trusty ZyXel NSA325v2 had been happily syncing for a few years after I upgraded from btsync 1.2.73 to btsync 2.2.6 in 2015, until, it seems about May 2018.  

Because Resilio Sync "just works" i didn't noticed it had stopped until I tried to pull down a selective sync folder. So in September 2019 I upgraded to the latest version, with the help of ResilioSync support.  

The latest version, 2.6.3, is NOT supported and will not work. so you need a slightly older version (2.5.12)

Steps: 

  • Download the ARM version https://download-cdn.getsync.com/2.5.12/linux-arm/resilio-sync_arm.tar.gz  
  • Unpack the tarball `tar xvzf resilio-sync_arm.tar.gz`
  • Copy `rslsync` to your NAS drive (FTP, SSH?) 
  • Telnet/SSH to your NAS, copy `rslsync` to the folder: `/usr/local/zy-pkgs/bin` but name it something like `rslsync_2.5.12`
  • Move the old binary and replace it with a symlink `mv btsync btsync_2.2.6` and then symlink the new one like `ln -s rslsync_2.5.12 btsync`
  • Reboot the NAS simply enter the command`reboot` 

Hope this helps someone! :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.