xineru

November 26, 2013

here ffpboot.log, in the other things the last thing : "ping: bad address 'ffp.inreto.de'" the nas have internet conection and not firewalk actived in the router. can help me?

thanks.

Rotating logfiles...

Script fun_plug.sh version 20131124 running from /mnt/parnerkey

ffpstick started at Tue Nov 26 13:00:46 UTC 2013

Try to determine NAS type...

according to /zyxel/mnt/info/modelid: A203->NSA310_ZyXEL

type NSA310_ZyXEL, fw V4.62(AFK.0)

Find the current usb device...usb device is /dev/sdb1 on device /dev/sdb

Check for filesystem...Filesystem is vfat

Check /dev/sdb for number of partitions.../dev/sdb has 1 partitions

Will have to repartition

Copy files to ramdisk...

Copied usb_key_func.sh nsa210_check_file md5sum nsa220_check_file NSA221_check_file salted_md5sum nsa310_check_file_C0 salted_md5sum_3x0 STG100_check_file STG211_check_file STG212_check_file mkdosfs after_booting.sh rootfs.tgz fun_plug.sh

Script fun_plug.sh version 20131124 running from /tmp/.ffpstick

Repartition /dev/sdb

unmount /mnt/parnerkey...done

Repartitioning...

The number of cylinders for this disk is set to 10112.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Building a new DOS disklabel with disk identifier 0x22662f23.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.

The number of cylinders for this disk is set to 10112.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

(e.g., DOS FDISK, OS/2 FDISK)

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): Command action

e extended

p primary partition (1-4)

Partition number (1-4): First cylinder (1-10112, default 1): Using default value 1

Last cylinder, +cylinders or +size{K,M,G} (1-10112, default 10112):

Command (m for help): Command action

e extended

p primary partition (1-4)

Partition number (1-4): First cylinder (336-10112, default 336): Using default value 336

Last cylinder, +cylinders or +size{K,M,G} (336-10112, default 10112): Using default value 10112

Command (m for help): Partition number (1-4): Hex code (type L to list codes): Changed system type of partition 1 to 4 (FAT16 <32M)

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: If you have created or modified any DOS 6.x

partitions, please see the fdisk manual page for additional

information.

Syncing disks.

Done. Creating and mounting filesystems...

Create ext3 filesystem on /dev/sdb2 and mount...

Filesystem label=FFPROOT

OS type: Linux

Block size=1024 (log=0)

Fragment size=1024 (log=0)

119888 inodes, 479073 blocks

23953 blocks (5%) reserved for the super user

First data block=1

Maximum filesystem blocks=524288

59 block groups

8192 blocks per group, 8192 fragments per group

2032 inodes per group

Superblock backups stored on blocks:

8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409

Mount /dev/sdb2 on /mnt/parnerkey type ext3...mount: wrong fs type, bad option, bad superblock on /dev/sdb2,