Supported NAS in Sync for NAS (Network Attached Storage) Posted April 26, 2013 · Report reply Working on Buffalo Linkstation Duo (LS-WXL). You need to change the port of the WebUI however, as you will not get any response from 8888. 8080 works fine. You will also need root access to the device of course, more info at http://buffalo.nas-c...Category:LS-WXL> wget http://btsync.s3-website-us-east-1.amazonaws.com/btsync_arm.tar.gz> tar zxvf btsync_arm.tar.gz> chmod u+x btsync> ./btsync --dump-sample-config > config.txt> nano config.txtChange:listen: 0.0.0.0:8888tolisten: 0.0.0.0:8080> ./btsyncyou might also have problems with the UPNP port mapping, then just port forward a port on your router, then change:listening_port: 0use_upnp: truetolistenning_port: YOUR_FORWARDED_PORTuse_upnp: falseIf anyone finds a way around the "change the web ui port" thing, please tell me. I have tried adding the ports to /etc/services, but that did not do anything... And you don't have access to iptables on the original firmware.