Reco-X
-
Posts
18 -
Joined
-
Last visited
Posts posted by Reco-X
-
-
16 hours ago, RomanZ said:
@Reco-X From your output I see that process is running and it listens to loopback interface for incoming connections. Could you please elaborate what do you mean under "but it doesnt work properly"? Do you attempt to connect to webUI from a different computer?
Yes that's my goal, so now I understand that the configuration file was wrong.
Now I have another question when I run the service the old folders that were sync are not more anymore in synchronization, there is any way to move the old config running with the service? -
Well I did all the stuff that you told me in your reply but it doesnt work properly
First I did:
sudo chown rslsync: /var/lib/resilio-sync
sudo chmod u+w /var/lib/resilio-syncps aux | grep sync
rslsync 7184 1.0 0.1 739016 4280 ? Ssl 06:37 0:00 /usr/bin/rslsync --config /etc/resilio-sync/config.json root 7199 0.0 0.0 12224 928 pts/1 S+ 06:37 0:00 grep --color=auto sync
sudo netstat -anp | grep synctcp 0 0 127.0.0.1:8888 0.0.0.0:* LISTEN 7184/rslsync tcp 0 0 0.0.0.0:36004 0.0.0.0:* LISTEN 7184/rslsync tcp6 0 0 :::36004 :::* LISTEN 7184/rslsync udp 0 0 127.0.0.1:55024 0.0.0.0:* 7184/rslsync udp 0 0 127.0.0.1:3838 0.0.0.0:* 7184/rslsync udp 0 0 0.0.0.0:3838 0.0.0.0:* 7184/rslsync udp 0 0 0.0.0.0:1900 0.0.0.0:* 7184/rslsync udp 0 0 37.187.125.87:59493 0.0.0.0:* 7184/rslsync udp 0 0 0.0.0.0:36004 0.0.0.0:* 7184/rslsync udp6 0 0 :::36004 :::* 7184/rslsync unix 3 [ ] STREAM CONNECTED 19039875 7184/rslsync P19039876 unix 3 [ ] STREAM CONNECTED 19039876 7184/rslsync P19039875But it doesnt work, any suggestion please??
-
Quote
Dear Lucas,
Ubuntu 14.04 has v-init startup system, therefore you need to start and stop Sync usingservice resilio-sync start / stop
commands. The binary will pick up the configuration file from /etc/resilio-sync/config.json location - this is how our service works. You can modify the file if you need. Note, that by default Sync is only listening a loopback interface, so if you want to make it listening ALL your interfaces, change the "127.0.0.1" to "0.0.0.0" in config file.
Also note, that Sync is using /var/lib/resilio-sync folder to keep its service data. This folder MUST belong to rslsync user as well as it's full content. Reading thru your forum post indicates that this could be an issue as you started sync under root at least once. Please verify this folder permissions.
Once you are done, there are 2 steps to verify that Sync is working properly:
1.ps aux | grep syncmust show you sync a) running b) running under rslsync account, like that:
rslsync 2806 0.0 0.6 525996 12808 ? Ssl 09:08 0:00 /usr/bin/rslsync --config /etc/resilio-sync/config.json
2.sudo netstat -anp | grep sync
should show you that sync is listening to at least one NIC for port 8888. On sample below, it listens loopback interface:tcp 0 0 127.0.0.1:8888 0.0.0.0:* LISTEN 2806/rslsync tcp 0 0 0.0.0.0:62686 0.0.0.0:* LISTEN 2806/rslsync tcp6 0 0 :::62686 :::* LISTEN 2806/rslsync udp 0 0 127.0.0.1:3838 0.0.0.0:* 2806/rslsync udp 0 0 10.0.2.15:3838 0.0.0.0:* 2806/rslsync udp 0 0 0.0.0.0:3838 0.0.0.0:* 2806/rslsync udp 0 0 0.0.0.0:1900 0.0.0.0:* 2806/rslsync udp 0 0 127.0.0.1:60585 0.0.0.0:* 2806/rslsync udp 0 0 0.0.0.0:62686 0.0.0.0:* 2806/rslsync udp 0 0 10.0.2.15:58889 0.0.0.0:* 2806/rslsync udp6 0 0 :::62686 :::* 2806/rslsync
Let me know if something is unclear and you need further guidance.
Roman Zanin,
Resilio Support TeamI have a couple of doubts.
1- If I choose a different path for the configuration file, why the service its still using the default path ?? Its not a big problem I will change it but I think if i can change the path must use my path.
"storage_path" : "/root/rslsync-config",
2- Why I must create an rslsync user? I want to use the service as root, I know for security reasons every app must be isolated under a user with restricted access, but lets say i dont care for now that, what the problem with the application? And if I want to create the account for rslsync what are the steps ??a) Create user with the command adduser
b) Give permission of 777 to the folders I sync with the applications and also the folder that have the program /var/lib/resilio-sync
c) what else? -
More information about the problem:
after do all this stuffwhen i run the program with
rslsynci have this
root 28146 0.3 0.0 667188 3596 ? Ssl 04:06 0:00 rslsync
root 28326 0.0 0.0 12220 924 pts/1 S+ 04:06 0:00 grep --color=auto rslsyncwhen i run the program as a service
service resilio-sync startit takes the configuration from a different file from my configuration file
rslsync 681 0.3 0.0 667160 3628 ? Ssl 04:11 0:00 /usr/bin/rslsync --config /etc/resilio-sync/config.json
root 698 0.0 0.0 12220 928 pts/1 S+ 04:11 0:00 grep --color=auto rslsyncand when i run the program in config mode, it works
rslsync --config sync.conf
root 1535 1.8 0.1 804340 5996 ? Ssl 04:13 0:00 rslsync --config sync.conf
root 1550 0.0 0.0 12220 928 pts/1 R+ 04:13 0:00 grep --color=auto rslsyncI try to put my config in /etc/resilio-sync/config.json to try the program when it starts as a service, but it doesnt work.
The same when i try to run the program as
rslsync --config /etc/resilio-sync/config.json -
Now I will try to delete all the PPAs and only left the original for resilio.
I have this ones
ls
btsync.list
btsync.list.distUpgrade
deluge-team-ppa-trusty.list
deluge-team-ppa-trusty.list.distUpgrade
deluge-team-ppa-trusty.list.save
resilio-sync.list
resilio-sync.list.distUpgrade
tuxpoldo-btsync-trusty.list
tuxpoldo-btsync-trusty.list.distUpgradeIm trying with strange stuff because i dont know the source of the problem.
-
And when i try
ps aux | grep sync after reboot the computer i have this
rslsync 4075 0.1 0.0 736764 3468 ? Ssl Jun01 0:55 /usr/bin/rslsync --config /etc/resilio-sync/config.json
root 24424 0.0 0.0 12224 928 pts/0 D+ 02:04 0:00 grep --color=auto syncThe strange here its that the config file its another than and another folder from my configuration
"storage_path" : "/root/rslsync-config", -
Another thing.
When i write this command:
ps aux | grep syncroot 21145 0.0 0.0 12224 924 pts/4 S+ 17:02 0:00 grep --color=auto sync
But when i try to kill this process throw:-bash: kill: (21145) - No such process
Any suggestions ?
-
First the OS its Ubuntu 14.04.5 LTS not 16 my error.
Another think I figure out, the PID is never changing in the pid file.
Just in case im doing rslsync --config <<file>> for do the changes. -
Hello, I have a problem with rslsync basically I try to fix it since uninstalling it and trying doing a fresh install, try to modify the parameters in conf file, and also see and learn about service , upstart and so on.
Basically if I write this command:
service resilio-sync startthe message I have its this:
Starting Resilio Sync
But this doest start any process.If I write this command:
rslsyncI have this message:
By using this application, you agree to our Privacy Policy, Terms of Use and End User License Agreement.
https://www.getsync.com/legal/privacy
https://www.getsync.com/legal/terms-of-use
https://www.getsync.com/legal/eulaResilio Sync forked to background. pid = 16428
But my problem is when I try to go to the GUI in the browser it doesnt work, http://ip:8888/
This is my conf file.
I dont know for example if the path of PID file is correct, but i dont think it the source of my problem
{ "device_name": "Seedbox", // "listening_port" : 0, // 0 - randomize port /* storage_path dir contains auxilliary app files if no storage_path field: .sync dir created in current working directory */ "storage_path" : "/root/rslsync-config", /* set location of pid file */ // "pid_file" : "/var/run/resilio/resilio.pid", /* use UPnP for port mapping */ "use_upnp" : true, /* limits in kB/s. 0 - no limit */ "download_limit" : 0, "upload_limit" : 0, /* proxy configuration */ // "proxy_type" : "socks4", // Valid types: "socks4", "socks5", "http_connect". Any other value means no proxy // "proxy_addr" : "192.168.1.2", // IP address of proxy server. // "proxy_port" : 1080, // "proxy_auth" : false, // Use authentication for proxy. Note: only username/password for socks5 (RFC 1929) is supported, and it is not really secure // "proxy_username" : "user", // "proxy_password" : "password", /* directory_root path defines where the WebUI Folder browser starts (linux only). Default value is / */ // "directory_root" : "/home/", /* directory_root_policy defines how directory_root is used (linux only). Valid values are: "all" - accepts directory_root and its subdirectories for 'getdir' and 'adddir' actions "belowroot" - accepts directory_root's subdirectories for 'getdir' and 'adddir' actions, but denies attempts to use 'adddir' to create directories directly within directory_root Default value is "all". */ // "directory_root_policy" : "all", "webui" : { "listen" : "0.0.0.0:8888" // remove field to disable WebUI /* preset credentials. Use password or password_hash */ // ,"login" : "admin" // ,"password" : "password" // ,"password_hash" : "some_hash" // password hash in crypt(3) format // ,"allow_empty_password" : false // Defaults to true /* ssl configuration */ // ,"force_https" : true // disable http // ,"ssl_certificate" : "/path/to/cert.pem" // ,"ssl_private_key" : "/path/to/private.key" /* dir_whitelist defines which directories can be shown to user or have folders added (linux only) relative paths are relative to directory_root setting */ // ,"dir_whitelist" : [ "/home/user/MySharedFolders/personal", "work" ] } /* !!! if you set shared folders in config file WebUI will be DISABLED !!! shared directories specified in config file override the folders previously added from WebUI. */ /*, "shared_folders" : [ { "secret" : "MY_SECRET_1", // required field - use --generate-secret in command line to create new secret "dir" : "/home/user/resilio/sync_test", // * required field "use_relay_server" : true, // use relay server when direct connection fails "use_tracker" : true, "search_lan" : true, "use_sync_trash" : true, // enable SyncArchive to store files deleted on remote devices "overwrite_changes" : false, // restore modified files to original version, ONLY for Read-Only folders "selective_sync" : false, // add folder in selective sync mode "known_hosts" : // specify hosts to attempt connection without additional search [ "192.168.1.2:44444" ] } ] */ /* Advanced preferences can be added to config file. Info is available at "http://help.getsync.com/customer/portal/articles/1902048-sync-advanced-preferences--more-options" For example see folder_rescan_interval below */ //, "folder_rescan_interval" : "86400" }So basically i need to fix this to run Resilio Sync and also I need to put rslsync as a service and made it start in the startup process.
Thanks
-
Well now is working, after doing evertything in the post i do this:
rslsync --config /etc/resilio-sync/config.jsonat lest now the gui is working, now is indexing files again, i hope the service is configured, if not tomorrow will get news about me lol
-
Well, Im trying to follow this guide:
https://help.getsync.com/hc/en-us/articles/206178924-Installing-Sync-package-on-Linux
Everything ok, but the problem is that i cannot see the gui in the explorer.When i enter this command
sudo serviceresilio-syncstartIt says
Starting Resilio Sync
But nothings happen, ok, trying to fix it, i did a
apt-get purge resilio-sync
to try to do a fresh install of it, but the point now is, THERE IS NO WIZARD like in btsync, and now Im not able to configure the program, where must i put the config file??
I read here:
that the file is in:
/etc/resilio-sync/config.json
So I configure again my Config File:
{
"device_name": "My Seedbox",
// "listening_port" : 0, // 0 - randomize port/* storage_path dir contains auxilliary app files if no storage_path field: .sync dir created in current working directory */
// "storage_path" : "/home/user/.sync",/* set location of pid file */
// "pid_file" : "/var/run/btsync/btsync.pid",/* use UPnP for port mapping */
"use_upnp" : true,/* limits in kB/s. 0 - no limit */
"download_limit" : 0,
"upload_limit" : 0,/* proxy configuration */
// "proxy_type" : "socks4", // Valid types: "socks4", "socks5", "http_connect". Any other value means no proxy
// "proxy_addr" : "192.168.1.2", // IP address of proxy server.
// "proxy_port" : 1080,
// "proxy_auth" : false, // Use authentication for proxy. Note: only username/password for socks5 (RFC 1929) is supported, and it is not really secure
// "proxy_username" : "user",
// "proxy_password" : "password",/* directory_root path defines where the WebUI Folder browser starts (linux only). Default value is / */
// "directory_root" : "/home/edu/",/* directory_root_policy defines how directory_root is used (linux only).
Valid values are:
"all" - accepts directory_root and its subdirectories for 'getdir' and 'adddir' actions
"belowroot" - accepts directory_root's subdirectories for 'getdir' and 'adddir' actions,
but denies attempts to use 'adddir' to create directories directly within directory_root
Default value is "all". */
// "directory_root_policy" : "all","webui" :
{
"listen" : "0.0.0.0:8888" // remove field to disable WebUI/* preset credentials. Use password or password_hash */
// ,"login" : "admin"
// ,"password" : "password"
// ,"password_hash" : "some_hash" // password hash in crypt(3) format
// ,"allow_empty_password" : false // Defaults to true
/* ssl configuration */
// ,"force_https" : true // disable http
// ,"ssl_certificate" : "/path/to/cert.pem"
// ,"ssl_private_key" : "/path/to/private.key"/* dir_whitelist defines which directories can be shown to user or have folders added (linux only)
relative paths are relative to directory_root setting */
// ,"dir_whitelist" : [ "/home/user/MySharedFolders/personal", "work" ]
}/* !!! if you set shared folders in config file WebUI will be DISABLED !!!
shared directories specified in config file override the folders previously added from WebUI. */
/*,
"shared_folders" :
[
{
"secret" : "MY_SECRET_1", // required field - use --generate-secret in command line to create new secret
"dir" : "/home/user/bittorrent/sync_test", // * required field
"use_relay_server" : true, // use relay server when direct connection fails
"use_tracker" : true,
"search_lan" : true,
"use_sync_trash" : true, // enable SyncArchive to store files deleted on remote devices
"overwrite_changes" : false, // restore modified files to original version, ONLY for Read-Only folders
"selective_sync" : false, // add folder in selective sync mode
"known_hosts" : // specify hosts to attempt connection without additional search
[
"192.168.1.2:44444"
]
}
]
*//* Advanced preferences can be added to config file. Info is available at "http://help.getsync.com/customer/portal/articles/1902048-sync-advanced-preferences--more-options"
For example see folder_rescan_interval below */
//, "folder_rescan_interval" : "86400"}
I need help to run again the program in the server...
I tried too with the command
rslsync --webui.listen 0.0.0.0:8888
And nothing.
-
The thing here is simple, we need a way to manage the queue.
So if a download 5 folders, i want to decide what folder i need first.
Thanks
-
Well, Im trying to follow this guide:
https://help.getsync.com/hc/en-us/articles/206178924-Installing-Sync-package-on-Linux
Everything ok, but the problem is that i cannot see the gui in the explorer.When i enter this command
sudo serviceresilio-syncstartIt says
Starting Resilio Sync
But nothings happen, ok, trying to fix it, i did a
apt-get purge resilio-sync
to try to do a fresh install of it, but the point now is, THERE IS NO WIZARD like in btsync, and now Im not able to configure the program, where must i put the config file??
-
You need to re-add them to Sync. Note that in Sync v2.2. in Free version only standard 1.4 folder can be added. To add advanced 2.x folder you need Pro.
You can find information on updating the package to 2.2 on this page Also, as far as I understood, Silvenga has created his own PPA, on same page there is a link to it.
How can i do it, in command line ??
-
Well i'm trying to add the folder ~/.aMule/Incoming trouhg the WEBUI but i always said that i don't have permissions.
I use this guide, but it don't works for me.
Can anyone help me please ??
-
>why that is the name of the server in preferences of the server WEB UI
it's taken after you computer name - smth that you'll see after executing "hostname" command
>why the folder appears 1.4?
these are the folders that were in Sync before you updated to Sync 2.x. The difference between folder v1.4 and folder v.2.x is pretty significant, so these are distinguished.
I'm not sure what Leo Moll meant by btsync-common, rather ask him. But it looks like he no longer supports his packages.
So you could use latest Linux binaries
I don't know how to use binaries.
I wish you create a PPA.
and what can i do to change the folder to 2.x ???
-
Well i have an ubuntu server and i had installed the version 1.4
i used this ppa to install the software
https://launchpad.net/~tuxpoldo/+archive/ubuntu/btsync
but now i had some problem with some files that i'm downloading, I'm not sure it is a problem of btsync but I try to solve it from diferents ways and this is i think 1 of the lasts steps.
I want to UPGRADE TO 2.0 version
i used this guide and everything go good
http://www.yeasoft.com/site/projects:btsync-deb:btsync-server
but in the WEB UI and DESKTOP CLIENT the server appears as 1.4
trying to solve it i REMOVE THE PACKAGE and then i install it again, but 1.4 still appears, here is a log from the last installation
root@ns333056:~# apt-get install btsync
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
btsync-core
Suggested packages:
bind-shim
The following NEW packages will be installed
btsync btsync-core
0 to upgrade, 2 to newly install, 0 to remove and 2 not to upgrade.
Need to get 4,966 kB of archives.
After this operation, 8,367 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://debian.yeasoft.net/btsync/ trusty/main btsync-core amd64 2.0.93-1 [4,864 kB]
Get:2 http://debian.yeasoft.net/btsync/ trusty/main btsync all 2.0.0-2 [102 kB]
Fetched 4,966 kB in 0s (5,098 kB/s)
Preconfiguring packages ...
Selecting previously unselected package btsync-core.
(Reading database ... 31386 files and directories currently installed.)
Preparing to unpack .../btsync-core_2.0.93-1_amd64.deb ...
Unpacking btsync-core (2.0.93-1) ...
Selecting previously unselected package btsync.
Preparing to unpack .../btsync_2.0.0-2_all.deb ...
Unpacking btsync (2.0.0-2) ...
Processing triggers for ureadahead (0.100.0-16) ...
Processing triggers for hicolor-icon-theme (0.13-1) ...
Setting up btsync-core (2.0.93-1) ...
Setting up btsync (2.0.0-2) ...there appears btsync-core and btsync with 2.0 version
but i have some questions:
https://launchpad.net/~tuxpoldo/+archive/ubuntu/btsync
Here in the ppa there are a lot of packages with versions
btsync 2.0.0-2
btsync-common 1.4.111-1
btsync-core 2.0.93-1
btsync-gui 0.8.5-1
btsync-user 1.16.0-1
I thinks i hav btsync 2.0 and btsync-core 2.0 too but what's is btsync-common??
and why in the clients appears the 1.4 version ??
Client connected to my server.
http://www.subeimagenes.com/img/screen-shot-2015-10-21-at-1-43-12-am-1494593.html
Another thing, Mac Lucas is my client not the server, i don't know why that is the name of the server in preferences of the server WEB UI
And there appears the version 2.0.93 like i installed with the ppa with btsync-core but why the folder appears 1.4?
http://www.subeimagenes.com/img/screen-shot-2015-10-21-at-1-45-15-am-1494594.html
Thanks for the help.
Not working in Ubuntu 16.0, Service start but doesnt work
in Sync Troubleshooting
Posted
@RomanZ