Sync Speed limitation

Recommended Posts

Im transferring files between to machines via WAN. At first I was limited to 5-10MB/s and found out i was limited by the relay. After going though through the forums, I setup "use predefined hosts" and setup port forwarding in my router. This still had not effect. I then went to Power User Preferences and changed tunnel_protocols to utp2;tcp.

After this change I jumped to 30MB/s or ~250Mbps and I have not been able to transfer any faster. ITs like there is a bandwidth cap. See the picture below. Both machines have 1Gbps symmetrical connections so theoretically should be able to transfer at 128MB/s.


Anyone have any insight on this?

Screen Shot 2024-01-08 at 2.36.41 PM.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.