[Latest Desktop Build 2.5.4]

@RomanZ I use ARM. ARMHF can not use because device does not have ld-linux-armhf.so.3.

If I create a link from ld-linux-armhf.so.3 to ld-linux.so.3, still not use, even in old version v2.4.5.

[Latest Desktop Build 2.5.4]

I have the same problem with @bielen2k
https://forum.resilio.com/topic/43414-latest-desktop-build-252/?do=findComment&comment=120480

V2.4.5 can work.
After V2.5.x, all have problem with [A newer kernel is required to run this binary. (__kernel_cmpxchg64 helper)]

Device: MiWiFi R1D(Tomato-Shibby with Entware-ng) + arm package

# cat /proc/cpuinfo
Processor       : ARMv7 Processor rev 0 (v7l)
processor       : 0
BogoMIPS        : 1998.84

processor       : 1
BogoMIPS        : 1998.84

Features        : swp half thumb fastmult edsp
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x3
CPU part        : 0xc09
CPU revision    : 0

Hardware        : Northstar Prototype
Revision        : 0000
Serial          : 0000000000000000

# cat /proc/version
Linux version 2.6.36.4brcmarm (root@ubuntu1404) (gcc version 4.5.3 (Buildroot 2012.02) ) #2 SMP PREEMPT Sun May 21 02:41:38 CST 2017

And I can not generate "crash dump" file follow https://sigquit.wordpress.com/2009/03/13/the-core-pattern/

[How to install resilio on MiWiFi R1D(Tomato-Shibby with entware)?]

Finally I found a way to avoid the problem (A newer kernel is required to run this binary). Use old version.

The last version available is 2.4.5, just modify interpreter then it can work.

[How to install resilio on MiWiFi R1D(Tomato-Shibby with entware)?]

@RomanZ

Thanks for your reply.

I try ARM because I only find ld-linux.so.3 in /opt/lib/.

(ARMHF needs ld-linux-armhf.so.3)

 

[How to install resilio on MiWiFi R1D(Tomato-Shibby with entware)?]

I ues MiWiFi router(R1D), and it has already install Tomato-Shibby 136 with entware.

I have done some research about it.
https://forum.resilio.com/topic/43083-install-resilio-on-arm-router/
https://forum.resilio.com/topic/33449-bittorrent-sync-on-miwifi/

First, I run the rslsync

# ./rslsync
-sh: rslsync: not found

 

So I use patchelf to change interpreter

# patchelf --set-interpreter /opt/lib/ld-linux.so.3 ./rslsync

Then try again

# ./rslsync
./rslsync: /lib/libpthread.so.0: no version information available (required by ./rslsync)
./rslsync: /lib/libpthread.so.0: no version information available (required by /opt/lib/librt.so.1)
./rslsync: /lib/libpthread.so.0: no version information available (required by /opt/lib/librt.so.1)
./rslsync: relocation error: ./rslsync: symbol __pthread_key_create, version GLIBC_2.4 not defined in file libpthread.so.0 with link time reference

# ldd rslsync
rslsync: /lib/libpthread.so.0: no version information available (required by rslsync)
rslsync: /lib/libpthread.so.0: no version information available (required by /opt/lib/librt.so.1)
rslsync: /lib/libpthread.so.0: no version information available (required by /opt/lib/librt.so.1)
        librt.so.1 => /opt/lib/librt.so.1 (0x40147000)
        libcrypt.so.1 => /opt/lib/libcrypt.so.1 (0x40051000)
        libdl.so.2 => /opt/lib/libdl.so.2 (0x40090000)
        libm.so.6 => /opt/lib/libm.so.6 (0x4015e000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x400a3000)
        libc.so.6 => /opt/lib/libc.so.6 (0x40213000)
        /opt/lib/ld-linux.so.3 (0x400f6000)
        libc.so.0 => /lib/libc.so.0 (0x40350000)
        ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x400be000)

 

Fix libpthread.so.0 path

# patchelf --remove-needed libpthread.so.0 ./rslsync
# patchelf --add-needed /opt/lib/libpthread.so.0 ./rslsync

But still error

# ./rslsync
A newer kernel is required to run this binary. (__kernel_cmpxchg64 helper)
Aborted

# ldd rslsync
        /opt/lib/libpthread.so.0 (0x40122000)
        librt.so.1 => /opt/lib/librt.so.1 (0x40059000)
        libcrypt.so.1 => /opt/lib/libcrypt.so.1 (0x400d4000)
        libdl.so.2 => /opt/lib/libdl.so.2 (0x4014c000)
        libm.so.6 => /opt/lib/libm.so.6 (0x4015f000)
        libc.so.6 => /opt/lib/libc.so.6 (0x40214000)
        /opt/lib/ld-linux.so.3 (0x40025000)

 

I have confirmed that all the files (*.so.*) are in /opt/lib/.

Does anyone know how to fix it?