supernerd Posted January 26, 2014 Report Share Posted January 26, 2014 (edited) Greetings, I appologize if this has been asked before; I didn't find anything. I am trying to find specific documentation on the settings generated by thebtsync --dump-sample-configcommand in linux. I want to understanding these various settings out of curiousity, and I am also trying to make sure of something else: <stupid questions>How can I be sure btsync is set up properly to transfer using the local network directly when possible instead of over the internet?(I still want it to transfer over the internet, just the local network should take priorety.) Also, will this local transfer still work when one device(raspberry pi) is hooked up via ethernet and the other device(laptop) is hooked up via wifi throught the same router, or will it go through the internet?</stupid questions> If someone can point me towards documentation or answer my stupid questions, I will be grateful. Thank you! Edited January 26, 2014 by supernerd Quote Link to comment Share on other sites More sharing options...
GreatMarko Posted January 26, 2014 Report Share Posted January 26, 2014 I am trying to find specific documentation on the settings generated by thebtsync --dump-sample-configcommand in linux. I want to understanding these various settings out of curiousity Please refer to the User Guide How can I be sure btsync is set up properly to transfer using the local network directly when possible instead of over the internet?(I still want it to transfer over the internet, just the local network should take priorety.)"Priority" is currently handled by Sync itself. Essentially, Sync's aim is to synchronize your files as fast as it can, therefore those devices that are able to deliver data faster will take priority. Now, usually, this will be local devices, so you don't need to worry, but you can't specifically set local to "take priority" over Internet. Also, will this local transfer still work when one device(raspberry pi) is hooked up via ethernet and the other device(laptop) is hooked up via wifi throught the same router, or will it go through the internet?Assuming your devices are still on the same logical network (i.e. your router's DHCP assigns IPs in the same range to both wired and wireless connections), then yes, they will be considered "local" Quote Link to comment Share on other sites More sharing options...
JimmyTheSaint Posted January 26, 2014 Report Share Posted January 26, 2014 Greetings, I appologize if this has been asked before; I didn't find anything. I am trying to find specific documentation on the settings generated by thebtsync --dump-sample-configcommand in linux. I want to understanding these various settings out of curiousity, and I am also trying to make sure of something else: Please refer to the User Guide The user guide only documents the advanced application settings (page 10), which you can insert at the end of the sync.conf file. But the standard settings aren't documented anywhere I can find, even if the function of some appears obvious. Quote Link to comment Share on other sites More sharing options...
supernerd Posted January 26, 2014 Author Report Share Posted January 26, 2014 Please refer to the User Guide "Priority" is currently handled by Sync itself. Essentially, Sync's aim is to synchronize your files as fast as it can, therefore those devices that are able to deliver data faster will take priority. Now, usually, this will be local devices, so you don't need to worry, but you can't specifically set local to "take priority" over Internet. Assuming your devices are still on the same logical network (i.e. your router's DHCP assigns IPs in the same range to both wired and wireless connections), then yes, they will be considered "local" I had read the user guide, but the documentation on these is a bit sparse. Anyway, you did answer my questions about this so thanks very much! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.