Campbell Posted August 8, 2016 Report Share Posted August 8, 2016 I've been beating my head against the wall for 2 days straight trying to get this to work. I've performed a fresh installation of btsync. From what I can read, after the install, the webui should be available immediately after install so that it can be configured further. However, I can't get it to show up at all. Here is my config: { "storage_path" : "/var/lib/btsync/", "vendor": "tuxpoldo", "display_new_version": false, "disk_low_priority" : true, "lan_encrypt_data" : true, "rate_limit_local_peers" : false, "folder_rescan_interval" : 600, "folder_defaults.delete_to_trash" : true, "folder_defaults.use_dht" : false, "folder_defaults.use_lan_broadcast" : true, "folder_defaults.use_relay" : true, "folder_defaults.use_tracker" : true, "folder_defaults.known_hosts" : "", "webui" : { "directory_root" : "/home/rtorrent/btsync", "listen" : "0.0.0.0:8888", "force_https" : false, "ssl_certificate" : "/etc/btsync/debconf-default.crt", "ssl_private_key" : "/etc/btsync/debconf-default.key" } } I do have some weird errors in sync.log: [20160808 13:58:39.652] total physical memory 536870912 max disk cache 2097152 [20160808 13:58:39.653] Using IP address 127.0.0.2 [20160808 13:58:39.655] Loading config file version 2.0.93 [20160808 13:58:39.655] My PeerID: 1099EC3D946C79DD30A8BC5F7AB749FDBB9D16D7 [20160808 13:58:43.878] UPnP: Could not map UPnP Port on this pass, retrying. [20160808 13:58:48.883] UPnP: Could not map UPnP Port on this pass, retrying. [20160808 13:58:51.887] NAT-PMP: Unable to map port with NAT-PMP. [20160808 13:58:53.888] UPnP: Could not map UPnP Port on this pass, retrying. [20160808 13:58:58.894] UPnP: Unable to map port 127.0.0.2:18213 with UPnP. I suspect the problem is where it says it is using IP address 127.0.0.2, but I have no idea why it would do that. This application is installed on a headless VPS running Ubuntu 14.04 x64. Quote Link to comment Share on other sites More sharing options...
Helen Posted August 9, 2016 Report Share Posted August 9, 2016 here are a few narrow places: 1) this is unofficial Sync packaged by tuxpoldo, who seems to have abandoned it long long ago. It's not our package, and not supported by us. 2) sync version there is too old - "Loading config file version 2.0.93". Current Sync v is 2.3.8 3) to access webui make sure that the process is running. You can install and run official Sync package, or download binary from our site and run it in config mode. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.