vocatus Posted April 14, 2014 Report Share Posted April 14, 2014 First I want to say thanks to the Sync dev team for your work on Sync - it is a fantastic project and very helpful to myself and a lot of others. So, thank-you. Moving right along... I distribute and maintain a repository of packages for PDQ Deploy (example). I've previously asked about getting the hard-coded 50-peer limit raised, removed or converted to a user-configurable variable (here). I recently upgraded BT Sync on the repo server from v1.2.91 to v1.3.89, and have noticed it now connects with a significantly reduced number of peers. Previously it would quickly hit the 50-peer limit; under the new version it struggles to keep around 20 peers connected. Because of this I was forced to revert back to v1.2.91 until it can be resolved. Was the peer limit reduced or any major protocol changes introduced in v1.3.89?Edit: changed version to v1.3.89 (not .87) Quote Link to comment Share on other sites More sharing options...
RomanZ Posted April 14, 2014 Report Share Posted April 14, 2014 @vocatus, Thanks for the feedback! The peer limit was not reduced in 1.3, it stayed the same - 50 peers. However, there were indeed major protocol changes in 1.3 - now BTSync contacts tracker server over TCP, and prefers TCP in LAN. Could you please collect the logs from your peer so we can check what is going wrong? Please make sure to set log_size to ~500 as you'll have huge amount of records in a log due to numerous peers. Quote Link to comment Share on other sites More sharing options...
vocatus Posted April 14, 2014 Author Report Share Posted April 14, 2014 Hi RomanZ, Thanks for the quick response. When I started Sync and waited a couple minutes to collect logs, it crashed. :-P I submitted the crash report via the in-app pop up. Log is attached below.sync.zip Quote Link to comment Share on other sites More sharing options...
RomanZ Posted April 15, 2014 Report Share Posted April 15, 2014 @vocatus, Thanks for the log. We'll see what's happening inside. Quote Link to comment Share on other sites More sharing options...
vocatus Posted April 15, 2014 Author Report Share Posted April 15, 2014 Just a quick update, the latest version (v1.3.89) continually crashes for me on Windows XP SP3. When it does stay running, it only maintains about 20 connected peers across two shares. When I roll back to v1.2.91, it works fine and suddenly connects to about 30-40 peers per folder share. Currently still running v1.2.91 because I have hosts needing updates, but I can roll back to v1.3.89 for more log collection or testing if you need. Quote Link to comment Share on other sites More sharing options...
vocatus Posted April 15, 2014 Author Report Share Posted April 15, 2014 @RomanZ, any update on this? Quote Link to comment Share on other sites More sharing options...
RomanZ Posted April 17, 2014 Report Share Posted April 17, 2014 @vocatus, Not yet, sorry. Quote Link to comment Share on other sites More sharing options...
KerLaeda Posted May 7, 2014 Report Share Posted May 7, 2014 Hi, vocatus, can you reproduce this crash again and send me crash dump? (if crash was handled by Windows it can be found in C:\Documents and Settings\All Users\Application Data\Microsoft\Dr Watson). Quote Link to comment Share on other sites More sharing options...
vocatus Posted May 10, 2014 Author Report Share Posted May 10, 2014 Hi, vocatus, can you reproduce this crash again and send me crash dump? (if crash was handled by Windows it can be found in C:\Documents and Settings\All Users\Application Data\Microsoft\Dr Watson). Sure thing, I'll load up the latest version (appears to be 1.3.94 as of 2014-05-10) and see if it crashes again. The primary problem I'm experiencing is that it will not connect to very many peers as compared with v1.2.91. A significantly reduced amount (from 50 down to about 10, if I'm lucky). Quote Link to comment Share on other sites More sharing options...
vocatus Posted May 10, 2014 Author Report Share Posted May 10, 2014 OK, it isn't crashing now, but it's still connecting with far less peers than normal (~20 instead of 50). I have debug logging turned on but am not seeing anything specifically related to peers. What next? Quote Link to comment Share on other sites More sharing options...
vocatus Posted May 11, 2014 Author Report Share Posted May 11, 2014 Hey Vildhet, some good news. After installing the latest version and letting it run for quite a while, it seems that a) it isn't crashing any more, and it does connect to a lot of peers now, about the same amount as previously. It takes longer to get connected than with v1.2.91, but does end up connecting. So we can probably consider this thread closed. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.