Tommmii Posted June 26, 2014 Report Share Posted June 26, 2014 2 windows machines on lan,direct connection (arrows in front of device in devices tab),rate limit local peers = true ,download limits = 0, upload limits from 1kB/s up to 1300kB/s are respected properly.Upload limits > 1300kB/s result in an upload speed of 1300kB/sUpload limit = 0 saturates the connection at 11MB/s Does any one have an idea as to what could be going on ? thx,Tom. Quote Link to comment Share on other sites More sharing options...
spYro Posted June 26, 2014 Report Share Posted June 26, 2014 are relayservers enabled/allowed in your 2 clients? there is a know bug in speedlimits when relayservers are enabled, if i remember correctly :/ Quote Link to comment Share on other sites More sharing options...
Helen Posted June 26, 2014 Report Share Posted June 26, 2014 Tommmii, Did you change limits to ">1300" after you tested 1-1300 without quitting BitTorrent Sync? If yes, try restarting the app after you changed limits. spYro,not exactly. As it is enabled relay server in folder settings doesn't makes difference. It's the way devices are connected that matters. If they are connected directly (Tommmii has direct connection, as he said "arrows in front of device in devices tab"), limits are honored.If they are connected via relay (cloud icon on tab 'Devices" instead of arrows) limits are not honored. And yes, this is a known issue. Quote Link to comment Share on other sites More sharing options...
spYro Posted June 26, 2014 Report Share Posted June 26, 2014 Tommmii, Did you change limits to ">1300" after you tested 1-1300 without quitting BitTorrent Sync? If yes, try restarting the app after you changed limits. spYro,not exactly. As it is enabled relay server in folder settings doesn't makes difference. It's the way devices are connected that matters. If they are connected directly (Tommmii has direct connection, as he said "arrows in front of device in devices tab"), limits are honored.If they are connected via relay (cloud icon on tab 'Devices" instead of arrows) limits are not honored. And yes, this is a known issue. Oh, thanks for that answer So... our clients always have the cloud-icon.... But now i wonder why? They all should have direct access to each other... I will check that tomorrow and see, if i can get direct connections Quote Link to comment Share on other sites More sharing options...
Tommmii Posted June 27, 2014 Author Report Share Posted June 27, 2014 @ Helen , the upload rate was set to 6000 and I noticed the actuel rate was 1300. I then quit btsync at both ends, and launched btsync again...no speed increase to the transfer rate. After that I went experimenting...and found no solution. SpYro , I had read your experiences with the relay servers and tried toggling that...no use. Quote Link to comment Share on other sites More sharing options...
RomanZ Posted June 28, 2014 Report Share Posted June 28, 2014 Tom, We'll try to reproduce your issue in our lab. Could you please share which versions of Windows do you use? Any installed firewalls , anti viruses or other security software? Quote Link to comment Share on other sites More sharing options...
Tommmii Posted June 28, 2014 Author Report Share Posted June 28, 2014 win server 2008 R2 SP1no security software. win7 x86K9 web protection, to limit internet browsing.btsync uses the other machine's read-only secret. I use the exact same setup at multiple locations. This one location is the only one with this symptom :-/ Quote Link to comment Share on other sites More sharing options...
RomanZ Posted June 28, 2014 Report Share Posted June 28, 2014 Tom, Thanks for info. We'll try to reproduce it and I'll get back to you. Quote Link to comment Share on other sites More sharing options...
siridas Posted July 12, 2014 Report Share Posted July 12, 2014 @spYro Thanks! I noticed a peer maxing out my uplink. I unchecked "Use relay server when required" (properties tab of the folder info menu) and restarted the client and now my upload limit is working properly. Quote Link to comment Share on other sites More sharing options...
RomanZ Posted August 8, 2014 Report Share Posted August 8, 2014 @Tom, Unfortunately, issue was not reproduced in our lab. However, some other issues, close to speed limits was resolved recently. Please stay tuned for 1.4 release which likely contains the fix for your issue. Quote Link to comment Share on other sites More sharing options...
Tommmii Posted August 8, 2014 Author Report Share Posted August 8, 2014 Thanks for the effort & feedback.Looking forward to 1.4, will get back should things change! Quote Link to comment Share on other sites More sharing options...
Tommmii Posted November 5, 2014 Author Report Share Posted November 5, 2014 digging up this issue...Have updated a pair of computers to 1.4.99The exact same issue is still present... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.