Andy+

Your solution, starting with version 2.3.8 to support only the Synology DSM 6 is not a good solution. The reason is, that available App's for DSM 6 are not fully developed and also DSM 6 itself in some things is still buggy. This means that not all users can change from 5.2 DSM to DSM 6. Why you no longer support both DSM 5.2 and 6 ?

Currently, after re-installation of version 2.3.6 from version 2.2.7 now is running. I make this test, if this effect is coming again.

I use the current version 2.3.6 of BTsync on different the servers DS1512_412+bittorrentsync_cedarview_2.3.6-1.spk DS1815+bittorrentsync_avoton_2.3.6-1.spk DS414_bittorrentsync_armadaxp_DSM52_2.3.6-1.spk DS712+bittorrentsync_x86_2.3.6-1.spk but the last as X86 on my DS712+ with DSM 6 doesn´t run. After some days the service stops and a new starting it´s not possible. Going back to version 2.2.7 was possible, now it runs.

Because of I use now a Synology DS1815+ please tell me, if possible to send me the SPK-package v2.2.7 for AVOTON. Thanks ..... avoton (x64) x15 Series DS1815+ - synology_avoton_1815+

If you use auto update, you only have the actual version of package center. computer Better is to download the actual version to your computer. Then go in Synology DSM to package center and to manual installation. Click on this and load the downloaded SPK and confirm. Than normaly it runs.

Because of the also popular QNAP devices I´m searching for a overview table similar to the Synology file, you have stored https://github.com/SynoCommunity/spksrc/wiki/Architecture-per-Synology-modelhttps://github.com/SynoCommunity/spksrc/wiki/Architecture-per-Synology-model I´m search for the right qpkg-package for TS-453, 653, 853, 563, but I´m not sure about this, if this are x86 or x64 types.

As follows : Just to clear things up - I guess/hope you mean that you want to get rid of the ports BitTorrent Sync is currently using and bring in new ports that your company supports?! Right? Yes, because if only ports 80 and 443 are used, other ports are not possible to use, this only is possible, if the ports are considered in a firewall. Companies usually have smarter firewalls that detect what kind of protocol it is and block it then (BitTorrent protocol in our case) it won't bring you much if it is a SSL connection. Also BitTorrent Sync is based on the BitTorrent protocol which is.. well it's own protocol. Thats true. And because of I visit much companys during my activities sometimes it seems that your part of name - sorry for this - "torrent" it seems very sensible, I don´t know why. I think it´s because of the torrent downloads in the Internet. E.g. in the company I visit today, the website http://www.bittorrent.com or http://forum.bittorrent.com is blocked because is registered as "peer to peer". Now your new http://forum.getsync.com in this case is no problem. BUT. What you can do to still use BitTorrent Sync in a company environment: You can set a proxy,if it is allowed by policies, Firewall etc or you can VPN out of the guest network if you want and then be able to establish a connection to your peers. That with the proxy settings is correct of course I have already tested. But alone with this feature unfortunately I can not connect. When I try to remove the hook at port, this is not possible. I can try another port no. but again no port 80.

The documentation you find https://github.com/SynoCommunity/spksrc/wiki/Architecture-per-Synology-model and so you load https://download-cdn.getsync.com/2.3.1/Synology/bittorrentsync_armadaxp_2.3.1-1.spk

Your versioning is not clear for me. Hours ago you present here version 2.3.1 and for Synology since days I can load e.g. bittorrentsync_x86_2.3-1.spk with "2.3-1" in the name. So I´m confused and don´t know, if bittorrentsync_x86_2.3-1.spk now is BTsync version 2.3.1.

I don´t understand, because the folder ".sync" is not new. What is the news for this?

I have a problem in http://forum.getsync.com/topic/42078-btsync-v23-1-on-synology´s/ Is possible to get a response?

Any ideas?

Maybe the same problem? http://forum.getsync.com/topic/42078-btsync-v23-1-on-synology´s/

To work in company environments there is no solution implemented to work without ports. Because in the most of companys only the ports 80 and 443 are open, as visitor there is no possibility to connect to the own BTsync network, also not over Relay servers.

Normaly this is no problem. Which DS you have? BTW I have a issue with v2.3-1 http://forum.getsync.com/topic/42078-btsync-v23-1-on-synology´s/ and go back to v2.2.7, which is running perfectly. If you have problems to use the package from Synology package center, you also can try https://www.getsync.com/intl/de/platforms/desktop http://help.getsync.com/hc/en-us/articles/206215185

I want to buy a DS415+ or DS1515+ and which support you have for this DS´s

Simply install manually with SPK´s from Bittorrent and setting up all folders.

....before with version 2.3.0 at my DS712+ was..........

And also the resources situation is much better with v2.2.7.........

I use the Synology server DS412+, DS1512+, DS712+ (with DSM 6 Beta) and DS414. As the new v2.3.0 is coming, I install this version on all servers and my Windows computers. Up to this time I use v2.2.7 and I can only say, it was a perfect running on all devices. Unfortunately the v2.3.0 doesn´t run well. Normally, up to v2.2.7 the client on Windows in a very short time is transfering data to the other devices if any changes happen. But not with v2.3.0 and it becomes clear, that no or only a partly transfer was done, also over hours and days. Also a mixed situation with v2.2.7 and v2.3.0 doesn´t run. Also no difference I have if I use the client as service or "normal". Or new installations are also without success. Now I goe back on all devices to v2.2.7 - and - I´m happy as before. All is running smoothly and well. What is the difference in the software or what can I doe in a other way?

Not in this moment, because the server is down. But on my second machine, a Synology DS712+ I have the follow situation with 27 folders, which is similar.

In this moment I use 39 folders.

I use in a Synology DS412+ the newest version of BTsync, 2.3.0 and with this new version I identify a encreasing of the needed recoures and used RAM storage and the machine runs not smoothly because of it. Enclosed I have a picture of it.

BTsync is running now on DSM 6 Beta 2, but with circumstances, because of restore data. Before the Update of Beta 2 I make from BTsync in /volume1/@appstore a Backup and after I uninstall BTSync. I install Beta 2 and reinstall BTsync. I stop the service, restore the Backup and restart the service. All things are as before. I need this steps because a lot of folders and so things.

In this time I test the Synology DSM 6 Beta 1+2 on a Synology DS712+ and up to Beta 1 I can use the current BTsync. From yesterday the Beta 2 can be load from Synology to install on the DS´s and I load the Version: 6.0-7274 from 21.1.2016. During installation I get a message, that the current version 2.3.100 of BTsync is not compatible to this and must be delete, if I want to update to Beta 2. I cancel this. What can I due?