trevellyan Posted August 8, 2014 Report Share Posted August 8, 2014 Interesting. And did you solve the missing package problem?Ā I'm not the OP for that issue. Link to comment Share on other sites More sharing options...
tuxpoldo Posted August 8, 2014 Author Report Share Posted August 8, 2014 I'm not the OP for that issue.Ā Sorry - you are right.... My fault. Link to comment Share on other sites More sharing options...
Catsrules Posted August 15, 2014 Report Share Posted August 15, 2014 So I was tolded to post this here from my last post Ā Blank Web Gui Ubuntu 14.4Just a recap on my problem.Ā I have a ubuntu 14.4 server, I was playing around with file permissions because I was having permission issues between btsync and SAMBA. After playing around with it I finely changed the umask to 775, this fixed my problem. However so some reason the Web Gui is now broken. When I go to the web gui, I get a password prompt I enter in the password and I get a blank page. I haveĀ rebooted the server, restated btsync, reran the btsyn config. uninstalled and reinstalled btsync. But nothing has worked.Ā Any ideas?How can I reset everything to default? Link to comment Share on other sites More sharing options...
richdotward Posted August 16, 2014 Report Share Posted August 16, 2014 So I was tolded to post this here from my last post Blank Web Gui Ubuntu 14.4Just a recap on my problem.I have a ubuntu 14.4 server, I was playing around with file permissions because I was having permission issues between btsync and SAMBA. After playing around with it I finely changed the umask to 775, this fixed my problem. However so some reason the Web Gui is now broken. When I go to the web gui, I get a password prompt I enter in the password and I get a blank page. I have rebooted the server, restated btsync, reran the btsyn config. uninstalled and reinstalled btsync. But nothing has worked.Any ideas?How can I reset everything to default?Same blank screen on my Ubuntu 14.04. It's still working as my other bitsync systems connect and work.RichSent from my Nexus 4 using Tapatalk Link to comment Share on other sites More sharing options...
Catsrules Posted August 17, 2014 Report Share Posted August 17, 2014 It has something to do umask. If I change it back to default (that is blank), then the web UI works. I am guessing this is a bug in the program? Link to comment Share on other sites More sharing options...
richdotward Posted August 17, 2014 Report Share Posted August 17, 2014 Same blank screen on my Ubuntu 14.04. It's still working as my other bitsync systems connect and work.RichSent from my Nexus 4 using Tapatalk Fixed it by removing bitsync totally and reinstalling version 1.2.92 manually.Then tried same method with 1.3. Anything above 1.3.94 has the same blank GUI problem.RichSent from my Nexus 4 using Tapatalk Link to comment Share on other sites More sharing options...
acmodeu Posted August 28, 2014 Report Share Posted August 28, 2014 When 1.4.72 will be available for debian servers? Link to comment Share on other sites More sharing options...
tuxpoldo Posted August 29, 2014 Author Report Share Posted August 29, 2014 When 1.4.72 will be available for debian servers?Ā I'm currently making a series of compatibility tests. The modularity of the Debian packages implies that the update of btsync-common to 1.4.72 affects the server version, the gui version and the legacy gui version. Before publishing the update I have to make sure, that all dependent packages (btsync, btsync-gui, btsync-gui-gtk and btsync-user) are working properly. Ā Furthermore the specific download locations are still missing, making it impossible to generate/execute a reproducible build script. In addition the GEODE version is also missing... Ā So stay tuned. Link to comment Share on other sites More sharing options...
die GO Posted September 1, 2014 Report Share Posted September 1, 2014 First of all thanks for the ppa!I have installed btsync from ppa and fine tuned.now when I try to backup my android phone camera, on the server Firefox that i have ro update to 1.4 if say i have it, it says that can't open link:The address wasn't understoodFirefox doesn't know how to open this address, because one of the following protocols (btsync) isn't associated with any program or is not allowed in this context.anyone can point my in the right direction?its a problem with version 1.3.x or it can grab links from android phone?problem of permissions?sorry for my english and thanks in advance!Enviado desde mi SM-N9005 mediante Tapatalk Link to comment Share on other sites More sharing options...
tuxpoldo Posted September 1, 2014 Author Report Share Posted September 1, 2014 Here it is! The long awaited update to 1.4. As usual it will take a few hours for people using the Launchpad PPA. The YeaSoft Repository is available immediately. Have fun!Ā btsync-common (1.4.72-1) unstable; urgency=low * New upstream release * Removed special handling for GEODE cpu -- Leo Moll <leo.moll@yeasoft.com> Sun, 31 Aug 2014 14:28:13 +0200btsync (1.4.0-1) unstable; urgency=low * Add support for BitTorrent Sync 1.4 - Add support for SSL certificates (Closes #144) - Add support for folder default settings (Closes #145) * Fixed storage_path in order to allow sybolic linking (Closes #140) * Streamlined configuration data between configuration file and Web UI (Closes #142) * Removed deprecated setting lan_use_tcp (Closes #143) -- Leo Moll <leo.moll@yeasoft.com> Mon, 01 Sep 2014 12:00:00 +0200 Link to comment Share on other sites More sharing options...
acmodeu Posted September 2, 2014 Report Share Posted September 2, 2014 Having trouble installing new btsync:sudo aptitude install btsyncThe following NEW packages will be installed: btsync btsync-common{a}0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.Need to get 5,661 kB of archives. After unpacking 8,570 kB will be used.Do you want to continue? [Y/n/?] yGet: 1 http://debian.yeasoft.net/btsync/ wheezy/main btsync-common amd64 1.4.72-1 [5,586 kB]Get: 2 http://debian.yeasoft.net/btsync/ wheezy/main btsync all 1.4.0-1 [75.0 kB]Fetched 5,661 kB in 3s (1,464 kB/s)Preconfiguring packages ...Selecting previously unselected package btsync-common.(Reading database ... 38898 files and directories currently installed.)Unpacking btsync-common (from .../btsync-common_1.4.72-1_amd64.deb) ...Selecting previously unselected package btsync.Unpacking btsync (from .../btsync_1.4.0-1_all.deb) ...Setting up btsync-common (1.4.72-1) ...Setting up btsync (1.4.0-1) ...dpkg: error processing btsync (--configure): subprocess installed post-installation script returned error exit status 1Errors were encountered while processing: btsyncE: Sub-process /usr/bin/dpkg returned an error code (1)A package failed to install. Trying to recover:Setting up btsync (1.4.0-1) ...dpkg: error processing btsync (--configure): subprocess installed post-installation script returned error exit status 1Errors were encountered while processing: btsync Link to comment Share on other sites More sharing options...
tuxpoldo Posted September 2, 2014 Author Report Share Posted September 2, 2014 Can you please tell me which exact Distribution you are using? Link to comment Share on other sites More sharing options...
acmodeu Posted September 2, 2014 Report Share Posted September 2, 2014 Can you please tell me which exact Distribution you are using?Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.60-1+deb7u3 Link to comment Share on other sites More sharing options...
ICE Posted September 2, 2014 Report Share Posted September 2, 2014 I had the same problem. Are you using default configuration, or a self created configuration file? For me using the default configuration fixed the "problem" Link to comment Share on other sites More sharing options...
tuxpoldo Posted September 2, 2014 Author Report Share Posted September 2, 2014 I had the same problem. Are you using default configuration, or a self created configuration file? For me using the default configuration fixed the "problem"Ā Thank you! I was able to reproduce the problem. The fix will be released in a few minutes. See Issue #147 for more details. Link to comment Share on other sites More sharing options...
acmodeu Posted September 2, 2014 Report Share Posted September 2, 2014 I had the same problem. Are you using default configuration, or a self created configuration file? For me using the default configuration fixed the "problem"I tried upgrading with self created configuration file but failed. Moved my configuration to backup place, tried to install from scratch but also failed. Let's hope that tuxpoldo's fix will work. Link to comment Share on other sites More sharing options...
tuxpoldo Posted September 2, 2014 Author Report Share Posted September 2, 2014 Fixed. Update available on YeaSoft's repository. Launchpad PPA, as usually, will take a few hours to update.Ā btsync (1.4.0-2) unstable; urgency=low * Fixed installation error on systems with no configured default instance (Closes #147) -- Leo Moll <leo.moll@yeasoft.com> Tue, 02 Sep 2014 12:41:13 +0200 Link to comment Share on other sites More sharing options...
acmodeu Posted September 2, 2014 Report Share Posted September 2, 2014 Something weird happens now:~$ sudo aptitude install btsyncThe following NEW packages will be installed: btsync btsync-common{a}0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.Need to get 0 B/5,661 kB of archives. After unpacking 8,570 kB will be used.Do you want to continue? [Y/n/?] yPreconfiguring packages ...Selecting previously unselected package btsync-common.(Reading database ... 38899 files and directories currently installed.)Unpacking btsync-common (from .../btsync-common_1.4.72-1_amd64.deb) ...Selecting previously unselected package btsync.Unpacking btsync (from .../btsync_1.4.0-2_all.deb) ...Setting up btsync-common (1.4.72-1) ...Setting up btsync (1.4.0-2) ...I have to manually run sudo dpkg-reconfigure btsync and then there is nothing:sudo /etc/init.d/btsync startsudo: /etc/init.d/btsync: command not found Link to comment Share on other sites More sharing options...
tuxpoldo Posted September 2, 2014 Author Report Share Posted September 2, 2014 ??? Try this:dpkg -l btsyncls -la /etc/init.d/btsyncand show me the output. This is really weird. Why you had to manually run dpkg-reconfigure? Link to comment Share on other sites More sharing options...
acmodeu Posted September 2, 2014 Report Share Posted September 2, 2014 @btsync:~$ dpkg -l btsyncDesired=Unknown/Install/Remove/Purge/Hold| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)||/ Name Version Architecture Description+++-==================================-======================-======================-=========================================================================ii btsync 1.4.0-2 all Private network P2P file synchronisation daemon(s)@btsync:~$ ls -la /etc/init.d/btsyncls: cannot access /etc/init.d/btsync: No such file or directoryI have to manually run it because it doesn't start itself. AFAIR it was after new install.Ā May be there is a way to clean all the traces of btsync and install it as new? Link to comment Share on other sites More sharing options...
tuxpoldo Posted September 2, 2014 Author Report Share Posted September 2, 2014 (edited) ...@btsync:~$ ls -la /etc/init.d/btsyncls: cannot access /etc/init.d/btsync: No such file or directoryI have to manually run it because it doesn't start itself. AFAIR it was after new install.Ā This is really weird! I do not understand, why the startup file is not there. Can you please checkĀ sudo ls -la /etc/init.dp.S.: You can try to remove btsync and reinstall it:Ā sudo apt-get -y remove btsyncsudo apt-get -y install btsyncIt's better not to use --purge, since it would kill /etc/btsync (with your configuration files) and /var/lib/btsync (which may contain a valid configuration).p.p.S.: If it was a new install and you do not risk to lose anything, you can also purge the old installation:sudo apt-get --yes ---purge remove btsyncsudo apt-get --yes ---purge autoremovesudo apt-get --yes install btsync Edited September 2, 2014 by tuxpoldo Link to comment Share on other sites More sharing options...
acmodeu Posted September 2, 2014 Report Share Posted September 2, 2014 @btsync:~$ ls -la /etc/init.dtotal 332drwxr-xr-x 2 root root 4096 Sep 2 15:53 .drwxr-xr-x 87 root root 4096 Sep 2 15:53 ..-rwxr-xr-x 1 root root 2227 Apr 16 2013 acpid-rwxr-xr-x 1 root root 2554 Aug 4 2012 amule-daemon-rwxr-xr-x 1 root root 1071 Jun 25 2011 atd-rwxr-xr-x 1 root root 1276 Oct 15 2012 bootlogs-rwxr-xr-x 1 root root 1281 Jul 14 2013 bootmisc.sh-rwxr-xr-x 1 root root 3816 Jul 14 2013 checkfs.sh-rwxr-xr-x 1 root root 1099 Jul 14 2013 checkroot-bootclean.sh-rwxr-xr-x 1 root root 9673 Jul 14 2013 checkroot.sh-rwxr-xr-x 1 root root 1379 Dec 9 2011 console-setup-rwxr-xr-x 1 root root 3033 Jul 4 2012 cron-rwxr-xr-x 1 root root 2832 Jun 12 2013 dbus-rw-r--r-- 1 root root 1759 Aug 11 08:59 .depend.boot-rw-r--r-- 1 root root 808 Aug 11 08:59 .depend.start-rw-r--r-- 1 root root 834 Aug 11 08:59 .depend.stop-rwxr-xr-x 1 root root 6435 Jan 2 2013 exim4-rwxr-xr-x 1 root root 6307 Jun 12 2013 fail2ban-rwxr-xr-x 1 root root 1329 Oct 15 2012 halt-rwxr-xr-x 1 root root 1423 Oct 15 2012 hostname.sh-rwxr-xr-x 1 root root 3880 Dec 11 2012 hwclock.sh-rwxr-xr-x 1 root root 7592 Apr 28 2012 kbd-rwxr-xr-x 1 root root 1591 Oct 1 2012 keyboard-setup-rwxr-xr-x 1 root root 1293 Oct 15 2012 killprocs-rwxr-xr-x 1 root root 1990 May 21 2012 kmod-rwxr-xr-x 1 root root 2528 Feb 17 2012 minissdpd-rwxr-xr-x 1 root root 995 Oct 15 2012 motd-rwxr-xr-x 1 root root 670 Feb 24 2013 mountall-bootclean.sh-rwxr-xr-x 1 root root 2128 Feb 24 2013 mountall.sh-rwxr-xr-x 1 root root 1508 Jul 14 2013 mountdevsubfs.sh-rwxr-xr-x 1 root root 1413 Jul 14 2013 mountkernfs.sh-rwxr-xr-x 1 root root 678 Feb 24 2013 mountnfs-bootclean.sh-rwxr-xr-x 1 root root 2440 Oct 15 2012 mountnfs.sh-rwxr-xr-x 1 root root 1731 Jul 14 2013 mtab.sh-rwxr-xr-x 1 root root 4322 Mar 14 2013 networking-rwxr-xr-x 1 root root 6491 May 11 2013 nfs-common-rwxr-xr-x 1 root root 1814 Dec 26 2009 ntp-rwxr-xr-x 1 root root 1346 May 20 2012 procps-rwxr-xr-x 1 root root 6120 Oct 15 2012 rc-rwxr-xr-x 1 root root 782 Oct 15 2012 rc.local-rwxr-xr-x 1 root root 117 Oct 15 2012 rcS-rw-r--r-- 1 root root 2427 Oct 15 2012 README-rwxr-xr-x 1 root root 639 Oct 15 2012 reboot-rwxr-xr-x 1 root root 1074 Jul 14 2013 rmnologin-rwxr-xr-x 1 root root 2344 Jun 15 2012 rpcbind-rwxr-xr-x 1 root root 3054 Mar 6 2013 rsyslog-rwxr-xr-x 1 root root 3023 Aug 15 2013 samba-rwxr-xr-x 1 root root 1163 Sep 16 2012 screen-cleanup-rwxr-xr-x 1 root root 3200 Oct 15 2012 sendsigs-rwxr-xr-x 1 root root 590 Oct 15 2012 single-rw-r--r-- 1 root root 4290 Oct 15 2012 skeleton-rwxr-xr-x 1 root root 3881 Feb 9 2013 ssh-rwxr-xr-x 1 root root 714 Jun 28 2012 sudo-rwxr-xr-x 1 root root 1906 May 28 2012 transmission-daemon-rwxr-xr-x 1 root root 8827 Nov 9 2012 udev-rwxr-xr-x 1 root root 1179 Aug 20 2012 udev-mtab-rwxr-xr-x 1 root root 2721 Apr 10 2013 umountfs-rwxr-xr-x 1 root root 2195 Apr 10 2013 umountnfs.sh-rwxr-xr-x 1 root root 1122 Oct 15 2012 umountroot-rwxr-xr-x 1 root root 3111 Oct 15 2012 urandom-rwxr-xr-x 1 root root 40372 Mar 19 01:02 vmware-tools-rwxr-xr-x 1 root root 1369 Apr 13 22:34 winbind-rwxr-xr-x 1 root root 2666 Mar 3 2012 x11-commonreinstall:btsync:~$ sudo apt-get -y remove btsync[sudo] password for root:Reading package lists... DoneBuilding dependency treeReading state information... DoneThe following package was automatically installed and is no longer required: btsync-commonUse 'apt-get autoremove' to remove it.The following packages will be REMOVED: btsync0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.After this operation, 283 kB disk space will be freed.(Reading database ... 38925 files and directories currently installed.)Removing btsync ...@btsync:~$ sudo apt-get -y install btsyncReading package lists... DoneBuilding dependency treeReading state information... DoneSuggested packages: bind-shimThe following NEW packages will be installed: btsync0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.Need to get 0 B/75.1 kB of archives.After this operation, 283 kB of additional disk space will be used.Preconfiguring packages ...Selecting previously unselected package btsync.(Reading database ... 38909 files and directories currently installed.)Unpacking btsync (from .../btsync_1.4.0-2_all.deb) ...Setting up btsync (1.4.0-2) ...@btsync:~$ ls -la /etc/init.d/bls: cannot access /etc/init.d/b: No such file or directory@btsync:~$ ls -la /etc/init.d/b*-rwxr-xr-x 1 root root 1276 Oct 15 2012 /etc/init.d/bootlogs-rwxr-xr-x 1 root root 1281 Jul 14 2013 /etc/init.d/bootmisc.sh Link to comment Share on other sites More sharing options...
die GO Posted September 2, 2014 Report Share Posted September 2, 2014 I don't know if that's the right place to ask but I can't open links for android backups on the server, Firefox says that unknown protocol and i searched and can't find a valid solution.How can I set firefox to "know" the protocol? any other solution? Can backups be set without webui interaction?Any other sync are working ok.Thanks in advance and sorry for any inconvenience. Enviado desde mi SM-N9005 mediante Tapatalk Link to comment Share on other sites More sharing options...
tuxpoldo Posted September 2, 2014 Author Report Share Posted September 2, 2014 @btsync:~$ ls -la /etc/init.d...Selecting previously unselected package btsync.(Reading database ... 38909 files and directories currently installed.)Unpacking btsync (from .../btsync_1.4.0-2_all.deb) ...Setting up btsync (1.4.0-2) ...@btsync:~$ ls -la /etc/init.d/bls: cannot access /etc/init.d/b: No such file or directory@btsync:~$ ls -la /etc/init.d/b*-rwxr-xr-x 1 root root 1276 Oct 15 2012 /etc/init.d/bootlogs-rwxr-xr-x 1 root root 1281 Jul 14 2013 /etc/init.d/bootmisc.shTry this:dpkg -L btsyncsudo ls -la /etc/init.d/b* Link to comment Share on other sites More sharing options...
ICE Posted September 2, 2014 Report Share Posted September 2, 2014 I don't know if that's the right place to ask but I can't open links for android backups on the server, [...]Ā You have to send the link from Android to your PC (for example via email) and then paste it under "Options --> Enter a key or link" Link to comment Share on other sites More sharing options...
Recommended Posts