mumen Posted November 4, 2014 Report Share Posted November 4, 2014 > Just to be absolutely precise - all secrets you use are starting with "A..." and "B..." and none - with "D...", "E...", "F...", right? Sorry I waited to answer : yes they all begin with A.-------------------------------------------------------I upgraded The two PC to 1.4.99The Android Phone to 1.4.56 The problem I described previously doesn't seem to occur anymore: the data I put on the PCs are copied in one shot to the phone. Quote Link to comment Share on other sites More sharing options...
lequick Posted November 4, 2014 Author Report Share Posted November 4, 2014 Are you using Encrypted nodes? - As I say, 1.4.99 fixes "Out of sync" issues with encrypted nodes Do we need to add the folders again on all clients? Or can we just update the clients? Quote Link to comment Share on other sites More sharing options...
RomanZ Posted November 4, 2014 Report Share Posted November 4, 2014 @mumenWe'll need your debug logs from all your peers affected the "out of sync" issue. @lequickYou might need to re-add the folder, as fix implies changes in data being written to DB. Quote Link to comment Share on other sites More sharing options...
mumen Posted November 4, 2014 Report Share Posted November 4, 2014 @mumenWe'll need your debug logs from all your peers affected the "out of sync" issue. @RomanZ I upgraded The two PC to 1.4.99The Android Phone to 1.4.56 The problem I described previously doesn't seem to occur anymore: the data I put on the PCs are copied in one shot to the phone. Oui? Quote Link to comment Share on other sites More sharing options...
RomanZ Posted November 5, 2014 Report Share Posted November 5, 2014 @mumenOkay then. Can you please debug mode on for a couple of weeks more so you'll capture debugs just in case issue comes back? Quote Link to comment Share on other sites More sharing options...
sfmcnally Posted November 6, 2014 Report Share Posted November 6, 2014 My encrypted nodes are still not syncing. I'm running 1.4.99 on all 3 computers. All windows 7 machines. 2 64bit and 1 32 bit. Quote Link to comment Share on other sites More sharing options...
GreatMarko Posted November 6, 2014 Report Share Posted November 6, 2014 My encrypted nodes are still not syncing. I'm running 1.4.99 on all 3 computers. All windows 7 machines. 2 64bit and 1 32 bit. As RomanZ indicated, you may need to remove and then re-add your affected folders back - have you done this? Quote Link to comment Share on other sites More sharing options...
Viper007Bond Posted November 7, 2014 Report Share Posted November 7, 2014 @all, if you're experiencing an "Out of sync" issue with Encrypted peers, then version 1.4.99 contains a fix for this particular issueI don't know what an encrypted peer is but I installed this on one of my machines and they all seem to be syncing correctly now! Thanks! Quote Link to comment Share on other sites More sharing options...
Hakker Posted November 9, 2014 Report Share Posted November 9, 2014 (edited) I have this too although maybe slightly different.I went to sync a directory with data on it (both the same for 99%) and lots of files aeound 30K. What it looks to me is that in 1.4.99 BTsync checks it's hash directly with the other file and can only do that 100x each 5 minutes. Why doesn't btsync just checks it's files on the new machine locally by the sync data between the two clients? For instance A has 3000 files B has 2990 of them. A sends it's filelist info(with the hashes to B ) B reads the hashes locally and checks them with it's own filelist. B marks the ones that are different and request those files from A. Now A just sends 100 hashes to B, B checks them and if all are good it waits 5 minutes till the next set comes. Edited November 9, 2014 by Hakker Quote Link to comment Share on other sites More sharing options...
ICE Posted November 9, 2014 Report Share Posted November 9, 2014 Are all file in sync when this process finishes? I had the same experiences, when I removed a folder from sync and then re-added. A few hashes were verified (not much outgoing traffic), then the process stopped and a few minutes later it continued. It's not that great to wait a few hours for 2 peers to show up "synced" status, if they were in sync before and you just re-added them. But this should usually be a one time process for the very first time sync runs on that peer, so it was okay for me to wait. Anyway of course it would be interesting to know why this takes so long. Quote Link to comment Share on other sites More sharing options...
RomanZ Posted November 10, 2014 Report Share Posted November 10, 2014 @HakkerThis is something Sync actually does (roughly). Though note, that it takes time to read 3000 files and hash them. @ICEWhen you re-add the folder, Sync completely "forgets" about all the files and adds them from scratch. And to do so - it needs to hash all of them. If sync does it way slower than HDD bandwidth (usually it is limited by HDD read speed, as CPU is powerful enough to hash data much faster than read from drive) - it looks to be a bug and to be investigated. Otherwise - it is app design. Quote Link to comment Share on other sites More sharing options...
GreatMarko Posted November 11, 2014 Report Share Posted November 11, 2014 @all - some further cases where files were not syncing ("out-of-sync") have been addressed in today's 1.4.103 build. If you're still experiencing "out of sync" issues, please update and see if this resolves your issue. Quote Link to comment Share on other sites More sharing options...
b0rman Posted November 11, 2014 Report Share Posted November 11, 2014 Didn't resolve. Fresh install, same problems with RO nodes. What am I doing wrong? Quote Link to comment Share on other sites More sharing options...
b0rman Posted November 12, 2014 Report Share Posted November 12, 2014 Also found that:1. If totally delete share folder from RO node (remove files) and try to sync from scratch than everything will be OK. But if after such sync You'll delete share from BTSync on RO node and will try to sync it from master to same folder - it will be Out of sync. 2. If there is one share with "real" Out of sync then all other "good" shares will be Out of sync at the end. If You'll delete that "real" Out of sync share, than other "fake" Out of sync folders will sync OK in a couple of minutes/seconds. Seems like there is limited number of file sync slots (it was 100 in previous versions and 180 now) and if every slot used by "bad file" that can't sync for any reason (or without it like in 1.4.* ) than there will be Out of sync error on any share folder.If slots count is more that "bad files" than those "bad files" will be set to another slots after timeout and everything could be OK - that's why Out of sync problem sometimes can be solved after lots of hours of wait. Also there is a temporary (for couple of seconds) Out of sync state when file with other than btsync process owner appears. BTW!!! Noticed such error in log:[20141112 02:59:50.615] 31.42.4x.xx:45039: did not pick any blocks. blocking peer temporarily[20141112 03:00:30.644] 31.42.4x.xx:45039: did not pick any blocks. blocking peer temporarily This IP is set as my master node on slave node shares. So if You'll block it, than it can cause "Out of sync"! OS Linux, CentOS 6.5. Master x64, Slave (RO) x86 Quote Link to comment Share on other sites More sharing options...
Mutantx Posted November 12, 2014 Report Share Posted November 12, 2014 Issue with this setup. Currently restarting does not resolve this issue -Mutantx Same issue still present with 1.4.103 beta on both devices. Fresh add of RO key to new folders on both devices. -Mutantx Quote Link to comment Share on other sites More sharing options...
RomanZ Posted November 12, 2014 Report Share Posted November 12, 2014 @b0rman 1. Yes, "Overwrite changed files" set2. OK, may I'll send logs soon3. Yes. VPN channel is set to connect to local IPs only.4. Why? At same moment ping is stable, speed with simple scp (rsync) is 25Mbps and more. 1. Any files are shown in sync queue (see peers list window)?2. Cool.3. Okay, does remote peers has local IPs from the same IP range as your peer? If yes - it still will attempt to connect them directly.4. I suggest checking that the ports configured as "Listening" are not blocked by firewall. Also, are there any mobile devices involved? They process approvals slightly different.@MutantxDo I understand correctly that your Linux and Win peers cannot sync the photo backup folder between them? Or some other folder keeps to be "out-of-sync" when iPhone is disconnected? Quote Link to comment Share on other sites More sharing options...
citronbleu Posted November 12, 2014 Report Share Posted November 12, 2014 Hi,How can I activate "Overwrite any changed files" using config file on a BTSync node without web GUI?I'm trying to resolve some Out of sync issue between several nodes. Thanks a lot! Quote Link to comment Share on other sites More sharing options...
RomanZ Posted November 13, 2014 Report Share Posted November 13, 2014 @citronbleu Try setting "overwrite_changes" to "true". I'll add this to documentation. Quote Link to comment Share on other sites More sharing options...
Finar Posted November 15, 2014 Report Share Posted November 15, 2014 I have updated to 1.4.103, but I have this "out-of-sync" problem when trying to resync readonly folder. I have two computers working under Windows 7, syncing a folder, size over 1500 gigabytes. Computer A has master-key, computer B has no key currently and I want to give it read-only key. (that situation appears because of OS reinstalling). Both comuters have now currently similar folders, I just want to connect them again. But when I add a read-only key to computer B, it recieves data for 5-15 seconds, after this it freeze for 1-2 minutes with "out-of-sync" status. Then again getting data for 5-15 seconds and all over this circle. At the same time, first time synchronise works normal. Do you need my logs to fix this? Quote Link to comment Share on other sites More sharing options...
smajor Posted November 16, 2014 Report Share Posted November 16, 2014 The latest updates have solved every out of sync issue I've had on OS X *except* the readonly folders others have mentioned. I have one very large one, terabytes in size, that used to sync well. In fact, it does seem to sync okay, new content is added to the readonly node, but it never gets a green checkmark and will say out of sync with no nodes available. Quote Link to comment Share on other sites More sharing options...
b0rman Posted November 16, 2014 Report Share Posted November 16, 2014 Extremely slow sync because of Out of sync on RO shares. Servers on same LAN with 1Gbps can't sync 8GB of share in one node. Even on Windows now Where is windows log file? Quote Link to comment Share on other sites More sharing options...
GreatMarko Posted November 16, 2014 Report Share Posted November 16, 2014 Where is windows log file? Please see my reply to your duplicate post here Quote Link to comment Share on other sites More sharing options...
RomanZ Posted November 17, 2014 Report Share Posted November 17, 2014 @Finar, @smajorCould it happen that your target RO folder has files that are different that original folder? In this case RW folder is going to get "Out-of-sync" status. It can be easily solved with setting "Overwrite changed files" preference in folder preferences. Quote Link to comment Share on other sites More sharing options...
Finar Posted November 17, 2014 Report Share Posted November 17, 2014 @RomanZno, files are the same for sure, see attacment Quote Link to comment Share on other sites More sharing options...
rossipedia Posted November 18, 2014 Report Share Posted November 18, 2014 Damn, guess this isn't quite fixed yet. Will check back later. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.